George Foreman Wire Repair Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

George Foreman Wire Repair
6 steps

Flags

BackGeorge Foreman Grill
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              George Foreman Wire Repair

Make sure the appliance is unplugged and cooled off before beginning the repair.
If the appliance is still on, this could lead to safety hazards such as burning of the hand or electrocution.
Lights will appear lit if the appliance is still on so make sure the lights are not illuminated.

Make sure the appliance is unplugged and cooled off before beginning the repair.

If the appliance is still on, this could lead to safety hazards such as burning of the hand or electrocution.

Lights will appear lit if the appliance is still on so make sure the lights are not illuminated.

1024

Step 2

Open the appliance by lifting the top plate away from you.

Open the appliance by lifting the top plate away from you.

Step 3

Remove the plates by pushing down on the black knobs on either side of the plates, top and bottom.
After, pick up and lift the plates off of the appliance.

Remove the plates by pushing down on the black knobs on either side of the plates, top and bottom.

After, pick up and lift the plates off of the appliance.

Step 4

Underneath where the plates sit you will see a coil and 12 screws holding the base plate in place.
Remove the 12 Phillips head screws on the bottom plate with a #1 Phillips head screw driver.

Underneath where the plates sit you will see a coil and 12 screws holding the base plate in place.

Remove the 12 Phillips head screws on the bottom plate with a #1 Phillips head screw driver.

Step 5

After unscrewing the screws, lift off the base plate.
This is where you will see the wires.

After unscrewing the screws, lift off the base plate.

This is where you will see the wires.

Step 6

Re-establish the disconnected or loose wires by pushing them back into the point of connection.
Push the wires into the connection center on the bottom of the plate until you can’t anymore. This is how you know they will not come loose again.
Make sure to keep the wires separated so they do not touch and become tangled to avoid sparks and electrocution.

Re-establish the disconnected or loose wires by pushing them back into the point of connection.

Push the wires into the connection center on the bottom of the plate until you can’t anymore. This is how you know they will not come loose again.

Make sure to keep the wires separated so they do not touch and become tangled to avoid sparks and electrocution.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Ali Sealby

Member since: 07/02/2018

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Eastern Washington University, Team S2-G1, Crane Summer 2018                        

                                                  Member of Eastern Washington University, Team S2-G1, Crane Summer 2018 



                    EWU-CRANE-SU18S2G1                     


                                            4 Members                     


                                            3 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team