Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Front Wheel
- 4 steps
Flags
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackGiant Reign 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hex Screws
- Using the 4mm Allen wrench, partially unscrew the 4 (22mm) hex screws on the front of the axle casing to allow the axle to slide freely.
Using the 4mm Allen wrench, partially unscrew the 4 (22mm) hex screws on the front of the axle casing to allow the axle to slide freely.
1024
Step 2
Axle Screw
- Using the 8mm Allen wrench, loosen the axle screw until 1/2 of the axle screw is visible.
- Push the axle screw to reveal the axle rod on the other side.
Using the 8mm Allen wrench, loosen the axle screw until 1/2 of the axle screw is visible.
Push the axle screw to reveal the axle rod on the other side.
Step 3
- Using the Allen wrench, finish unscrewing the axle screw and pull it out.
- Hold the wheel when pulling out the axle rod so that the bike does not fall.
Using the Allen wrench, finish unscrewing the axle screw and pull it out.
Hold the wheel when pulling out the axle rod so that the bike does not fall.
Step 4
Front Wheel
- Pull the wheel from the fork.
Pull the wheel from the fork.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 9 other contributors
Andrew Krasts
Member since: 10/05/2012
302 Reputation
2 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 9-14, Amido Fall 2012
Member of Cal Poly, Team 9-14, Amido Fall 2012
CPSU-AMIDO-F12S9G14
4 Members
10 Guides authored
