Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- RAM
- 3 steps
Flags
0
BackGigabyte P34G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Make sure you are grounded before starting. To ground yourself, simply touch a metal object that is in contact with the floor for a few seconds.
What you need
Step 1
RAM
- Unscrew the single 9.8mm screw on the underside of the laptop using a #0 screwdriver.
- Set the screw and cover plate in a safe space for reassembly later.
Unscrew the single 9.8mm screw on the underside of the laptop using a #0 screwdriver.
Set the screw and cover plate in a safe space for reassembly later.
1024
Step 2
- Pull the two marked tabs to the sides to release the RAM.
Pull the two marked tabs to the sides to release the RAM.
Step 3
- Carefully remove the existing RAM by pulling away from the connector and set it aside.
- After replacement, remember to re-lock the two white pins to secure the new RAM.
Carefully remove the existing RAM by pulling away from the connector and set it aside.
After replacement, remember to re-lock the two white pins to secure the new RAM.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
yeunghayden
Member since: 05/01/2015
823 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 8-1, Regan Spring 2015
Member of Cal Poly, Team 8-1, Regan Spring 2015
CPSU-REGAN-S15S8G1
5 Members
12 Guides authored
