Difficulty
Moderate
Steps
9
Time Required
20 - 25 minutes
Sections
2
- Screen
- 2 steps
- Speaker
- 7 steps
Flags
0
BackGoogle Pixel Slate
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Orient the Google Pixel Slate so that the screen is facing upwards.
- Use the iFixit opening tool to separate screen from main body.
- Use the suction cup to remove the screen from the body of the device.
Orient the Google Pixel Slate so that the screen is facing upwards.
Use the iFixit opening tool to separate screen from main body.
Use the suction cup to remove the screen from the body of the device.
1024
Step 2
- Gently disconnect the three flat-wires from the screen.
- Carefully separate and remove the screen from the body of the device.
Gently disconnect the three flat-wires from the screen.
Carefully separate and remove the screen from the body of the device.
Step 3
Speaker
- There are two speakers, one on each side of the Google Pixel Slate. This guide works for either one.
- Use the T2 Torx screwdriver to remove the yellow 2mm screw from the thin metal plate.
- Use the T3 Torx screwdriver to remove the pink 3mm screw from the thin metal plate.
- Remove the thin metal plate from the device.
There are two speakers, one on each side of the Google Pixel Slate. This guide works for either one.
Use the T2 Torx screwdriver to remove the yellow 2mm screw from the thin metal plate.
Use the T3 Torx screwdriver to remove the pink 3mm screw from the thin metal plate.
Remove the thin metal plate from the device.
Step 4
- Use the T2 Torx screwdriver to remove the two black 2mm screws from the speaker.
Use the T2 Torx screwdriver to remove the two black 2mm screws from the speaker.
Step 5
- Use the Nylon-Tipped Tweezers to remove the black plug.
- There is a red and a black wire connected to the black plug.
- Pull the black plug in an upwards direction.
- Be sure to gently remove plug, as using too much force can damage the connecting wires.
Use the Nylon-Tipped Tweezers to remove the black plug.
There is a red and a black wire connected to the black plug.
Pull the black plug in an upwards direction.
Be sure to gently remove plug, as using too much force can damage the connecting wires.
Step 6
- Use the Nylon-Tipped Tweezers to disconnect the black tape-like plug connected to the speaker.
Use the Nylon-Tipped Tweezers to disconnect the black tape-like plug connected to the speaker.
Step 7
- Detach the speaker wire from the motherboard.
- Remove the adhesive strips that hold down the speaker wire.
Detach the speaker wire from the motherboard.
Remove the adhesive strips that hold down the speaker wire.
Step 8
- Use the T2 Torx screwdriver to remove the 2mm black screw from the brass plate.
- Pull back the brass plate.
Use the T2 Torx screwdriver to remove the 2mm black screw from the brass plate.
Pull back the brass plate.
Step 9
- You can now remove the speaker from the device.
You can now remove the speaker from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Spencer Alonge
Member since: 04/18/2019
630 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team S2-G5, Maness Spring 2019
Member of Cal Poly, Team S2-G5, Maness Spring 2019
CPSU-MANESS-S19S2G5
4 Members
5 Guides authored
