Difficulty
Moderate
Steps
4
Time Required
30 minutes
Sections
1
- Pump Hose 288623
- 4 steps
Flags
3
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackGraco Paint Sprayer RTX1400si (2017)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Pump Hose 288623
- Remove 2 bolts holding the cover on
Remove 2 bolts holding the cover on
1024
Step 2
- Remove hose 288623
Remove hose 288623
Step 3
- Connect bottom hose to pump hose without locking it in all the way. Pulling hard you will pull the top portion of the hose through and feed it all the way over to the right locked in place
Connect bottom hose to pump hose without locking it in all the way. Pulling hard you will pull the top portion of the hose through and feed it all the way over to the right locked in place
Step 4
- With the top hose attached make sure to feed around both ends of the pully and pull bottom hose through and push all the way to the right
With the top hose attached make sure to feed around both ends of the pully and pull bottom hose through and push all the way to the right
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
10 other people completed this guide.
Author
with 1 other contributor
Trevor A
Member since: 09/16/2021
1,186 Reputation
6 Guides authored
Badges:
8
+5 more badges
