Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes

Sections

3

  • Front Panel
  • 2 steps
  • Back Panel
  • 2 steps
  • Mounting Post and Spring Replacement
  • 3 steps

Flags

0

  • BackGravityLight

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Removing the Front Panel
  • Flip the GravityLight on its back and place it on a sturdy surface.
  • Unscrew the three 2cm Phillips #00 screws on the back of the GravityLight’s body.

Flip the GravityLight on its back and place it on a sturdy surface.

Unscrew the three 2cm Phillips #00 screws on the back of the GravityLight’s body.

1024

Step 2

              Opening the Device Housing
  • Some of the internal pieces may loosen or fall out during disassembly.
  • Firmly grasp both parts of the GravityLight body and pull them apart.

Some of the internal pieces may loosen or fall out during disassembly.

Firmly grasp both parts of the GravityLight body and pull them apart.

Step 3

              Removing the Back Panel Screws
  • Place the back panel, the larger of the two pieces, on a sturdy surface with its back down.
  • Unscrew the two 2cm Phillips 00 screws on the inside of the back panel.

Place the back panel, the larger of the two pieces, on a sturdy surface with its back down.

Unscrew the two 2cm Phillips 00 screws on the inside of the back panel.

Step 4

              Separating the Back Panel Housing
  • Some of the internal pieces may loosen or fall out during disassembly.
  • Firmly grasp both parts of the back panel and pull them apart.

Firmly grasp both parts of the back panel and pull them apart.

Step 5

              Orienting the Middle Section
  • Place the middle section on a sturdy surface.
  • Move any wires in front of the mounting post.

Place the middle section on a sturdy surface.

Move any wires in front of the mounting post.

Step 6

              Removing the Mounting Post from the Middle Section.
  • Push down on the spring.
  • The spring is very stiff. Compressing the spring requires a moderate amount of force.
  • Push the spring and the mounting post away from the middle section and remove them from the pocket.

Push down on the spring.

The spring is very stiff. Compressing the spring requires a moderate amount of force.

Push the spring and the mounting post away from the middle section and remove them from the pocket.

Step 7

              Separate Mounting Post and Spring
  • Pull the mounting post out of the inside of the spring

Pull the mounting post out of the inside of the spring

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Jamie Forslin

Member since: 09/26/2014

143 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Cal Poly, Team 12-2, Forte Fall 2014                        

                                                  Member of Cal Poly, Team 12-2, Forte Fall 2014 



                    CPSU-FORTE-F14S12G2                     


                                            5 Members                     


                                            7 Guides authored