Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes

Sections

1

  • Plug Wiring
  • 5 steps

Flags

0

  • BackHamilton Beach Panini Press 25460Z

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Plug Wiring
  • Unplug your device before proceeding with disassembly.
  • Remove the four 14mm screws from the bottom of the Panini Press using the T10 Screwdriver.

Unplug your device before proceeding with disassembly.

Remove the four 14mm screws from the bottom of the Panini Press using the T10 Screwdriver.

1024

Step 2

  • Lift up the plastic cover to expose the plug wiring.
  • Mark the plug wire connected to the red wire with a piece of tape. This will be used as a reference for reassembly.

Lift up the plastic cover to expose the plug wiring.

Mark the plug wire connected to the red wire with a piece of tape. This will be used as a reference for reassembly.

Step 3

  • Use the pliers to pinch the widest point of the cap. This should be done opposite of the already existing crimps.
  • Slide off the white cap.
  • Repeat these steps for the second white cap.

Use the pliers to pinch the widest point of the cap. This should be done opposite of the already existing crimps.

Slide off the white cap.

Repeat these steps for the second white cap.

Step 4

  • Remove the two rubber screw covers from the bottom of the Panini Press.
  • Remove the four uncovered 10mm screws with the PH2 Screwdriver.

Remove the two rubber screw covers from the bottom of the Panini Press.

Remove the four uncovered 10mm screws with the PH2 Screwdriver.

Step 5

  • Lift the plastic lower heating element up and place to the side for reassembly. You have now disconnected the plug wiring completely.

Lift the plastic lower heating element up and place to the side for reassembly. You have now disconnected the plug wiring completely.

To reassemble your device, follow these instructions in reverse order. Make sure to correctly replace the wires using tape you placed earlier as a reference.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    Maxwell Taylor

Member since: 02/08/2015

149 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 6-27, Amido Winter 2015                        

                                                  Member of Cal Poly, Team 6-27, Amido Winter 2015 



                    CPSU-AMIDO-W15S6G27                     


                                            4 Members                     


                                            6 Guides authored