Difficulty
Easy
Steps
4
Time Required
2 minutes
Sections
1
- Base
- 4 steps
Flags
0
BackHamilton Beach 48464
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base
- This is what the bottom cover will look like. Flip the Brew Station upside down to easily access the screws.
This is what the bottom cover will look like. Flip the Brew Station upside down to easily access the screws.
1024
Step 2
- Using the Philips 2 Screwdriver, unscrew the three 8-mm screws labeled in a red outline.
- Using the Crown Bolt #8 Steel Spanner, unscrew the two 8-mm screws labeled in a orange outline.
Using the Philips 2 Screwdriver, unscrew the three 8-mm screws labeled in a red outline.
Using the Crown Bolt #8 Steel Spanner, unscrew the two 8-mm screws labeled in a orange outline.
Step 3
- Carefully slide off the bottom drip tray by sliding it out away from the Brew Station.
Carefully slide off the bottom drip tray by sliding it out away from the Brew Station.
Step 4
- Gently lift the base away from the Brew Station.
Gently lift the base away from the Brew Station.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Michael Damico
Member since: 02/10/2016
637 Reputation
6 Guides authored
Badges:
13
+10 more badges
Team
USF Tampa, Team 14-1, Lacy Spring 2016
Member of USF Tampa, Team 14-1, Lacy Spring 2016
USFT-LACY-S16S14G1
4 Members
6 Guides authored