Difficulty

Difficult

Steps

7

Time Required

                          15 - 45 minutes

Sections

1

  • Motor
  • 7 steps

Flags

0

  • BackBlender

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motor
  • Place the product on a clean and empty surface.

Place the product on a clean and empty surface.

1024

Step 2

  • Twist the attachment with the blades from the base of the blender.

Twist the attachment with the blades from the base of the blender.

Step 3

  • Unscrew the Tri-point screw (2mm) on the top to disassemble the top part of the casing.

Unscrew the Tri-point screw (2mm) on the top to disassemble the top part of the casing.

Step 4

  • Unscrew the Phillips (2mm) connecting the middle part of the casing with the bottom part.

Unscrew the Phillips (2mm) connecting the middle part of the casing with the bottom part.

Step 5

  • Use force to twist the middle part from the bottom part of the casing OR use spudgers to wiggle open the product.
  • This reveals the motor.

Use force to twist the middle part from the bottom part of the casing OR use spudgers to wiggle open the product.

This reveals the motor.

Step 6

  • Lift the motor out of the casing.
  • Unscrew the Phillips (2mm) to disconnect the motor from the plastic part that transfers the motor rotations to the blade.

Lift the motor out of the casing.

Unscrew the Phillips (2mm) to disconnect the motor from the plastic part that transfers the motor rotations to the blade.

Step 7

  • With a soldering iron disconnect the wires coming from the motor from the PCB.
  • Refer to this How to Solder and Desolder Connections guide to find more information on proper soldering techniques.

With a soldering iron disconnect the wires coming from the motor from the PCB.

Refer to this How to Solder and Desolder Connections guide to find more information on proper soldering techniques.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Nina Rodenburg

Member since: 03/08/2017

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Delft University of Technology, Team S1-G7, Flipsen Spring 2017                        

                                                  Member of Delft University of Technology, Team S1-G7, Flipsen Spring 2017 



                    TUD-FLIPSEN-S17S1G7                     


                                            4 Members                     


                                            1 Guide authored