Difficulty

Moderate

Steps

10

Time Required

                          5 minutes

Sections

3

  • Flip Cover
  • 1 step
  • Back Panel
  • 5 steps
  • Speaker
  • 4 steps

Flags

2

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackHandspring Visor Edge

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Flip Cover
  • Open the flip cover so that the tab on the back is easy to access.
  • Place the Visor Edge face down.
  • Identify the tab connecting the flip cover to the PDA located at the top of the backside.
  • Gently push the tab forward.
  • Do not pull on the flip cover in an attempt to remove it from the PDA.

Open the flip cover so that the tab on the back is easy to access.

Place the Visor Edge face down.

Identify the tab connecting the flip cover to the PDA located at the top of the backside.

Gently push the tab forward.

Do not pull on the flip cover in an attempt to remove it from the PDA.

1024

Step 2

              Back Panel
  • Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

Step 3

  • Remove the gray back plate from the PDA.

Remove the gray back plate from the PDA.

Step 4

  • Remove the four 2.6 mm Philips screws that are on the sides of the frame.
  • Remove the 3.9 mm Philips screw holding the stylus holster to the frame.

Remove the four 2.6 mm Philips screws that are on the sides of the frame.

Remove the 3.9 mm Philips screw holding the stylus holster to the frame.

Step 5

  • Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

Step 6

  • Remove the white frame from the back of the PDA.
  • The frame may get stuck on the corners so be very gentle when working the corners off.

Remove the white frame from the back of the PDA.

The frame may get stuck on the corners so be very gentle when working the corners off.

Step 7

              Speaker
  • Pull off front cover gently.

Pull off front cover gently.

Step 8

  • Remove buttons by hand, they should come off easily.

Remove buttons by hand, they should come off easily.

Step 9

  • Pull off button board that was underneath buttons.

Pull off button board that was underneath buttons.

Step 10

  • Use tweezers to pull speaker off.
  • Pull speaker off by wire, pull down away from screen.

Use tweezers to pull speaker off.

Pull speaker off by wire, pull down away from screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Nick Lazarakis

Member since: 01/23/2011

331 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 11-28, Maness Winter 2011                        

                                                  Member of Cal Poly, Team 11-28, Maness Winter 2011 



                    CPSU-MANESS-W11S11G28                     


                                            4 Members                     


                                            7 Guides authored