Harman Kardon Esquire Mini Buttons And Charging Indicator Lights S Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          8 minutes            

Sections

2

• Front Panel
• 2 steps
• Buttons and Charging Indicator Lights’s
• 2 steps

Flags

0

• BackHarman Kardon Esquire Mini

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Panel               

• Using the plastic opening tool, to open the back panel of the device. Start on the longer sides to avoid bending the metal frame at the plug ports.
• Push down on the plastic opening tool, and push the back panel, repeat this for the 4 sides of the device.

Using the plastic opening tool, to open the back panel of the device. Start on the longer sides to avoid bending the metal frame at the plug ports.

Push down on the plastic opening tool, and push the back panel, repeat this for the 4 sides of the device.

1024

Step 2

• Using the PH0 screw driver, remove the 7.5 mm screws by turning in a counter-clockwise direction. There are 6 screws on the front panel.
• Remove all of the 7.5 mm screws, by repeating the same step above. It is not necessary to remove the stand-leg.
• After unscrewing the 7.5 mm screws, just lift the plastic and you will see the motherboard.

Using the PH0 screw driver, remove the 7.5 mm screws by turning in a counter-clockwise direction. There are 6 screws on the front panel.

Remove all of the 7.5 mm screws, by repeating the same step above. It is not necessary to remove the stand-leg.

After unscrewing the 7.5 mm screws, just lift the plastic and you will see the motherboard.

Step 3

              Buttons and Charging Indicator Lights's               

• The buttons will be on the side of the device, use the plastic opening tool to remove it from its actual place no need to use any screwdrivers.

The buttons will be on the side of the device, use the plastic opening tool to remove it from its actual place no need to use any screwdrivers.

Step 4

• Use the plastic opening tool to remove the indicator lights and replace them by new ones.

Use the plastic opening tool to remove the indicator lights and replace them by new ones.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    yousef aljeemaz                     

Member since: 10/18/2017

928 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team S1-G9, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S1-G9, Cagle Fall 2017 



                    USFT-CAGLE-F17S1G9                     


                                            5 Members                     


                                            5 Guides authored