Harman Kardon Esquire Mini Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          8 minutes

Sections

Front Panel
2 steps
Speaker
3 steps

Flags

BackHarman Kardon Esquire Mini
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Front Panel

Using the plastic opening tool, to open the back panel of the device. Start on the longer sides to avoid bending the metal frame at the plug ports.
Push down on the plastic opening tool, and push the back panel, repeat this for the 4 sides of the device.

Using the plastic opening tool, to open the back panel of the device. Start on the longer sides to avoid bending the metal frame at the plug ports.

Push down on the plastic opening tool, and push the back panel, repeat this for the 4 sides of the device.

1024

Step 2

Using the PH0 screw driver, remove the 7.5 mm screws by turning in a counter-clockwise direction. There are 6 screws on the front panel.
Remove all of the 7.5 mm screws, by repeating the same step above. It is not necessary to remove the stand-leg.
After unscrewing the 7.5 mm screws, just lift the plastic and you will see the motherboard.

Using the PH0 screw driver, remove the 7.5 mm screws by turning in a counter-clockwise direction. There are 6 screws on the front panel.

Remove all of the 7.5 mm screws, by repeating the same step above. It is not necessary to remove the stand-leg.

After unscrewing the 7.5 mm screws, just lift the plastic and you will see the motherboard.

Step 3

              Speaker

Pull out the motherboard by removing 4 screws around the perimeter of the motherboard. Keep in mind the wires still attached to the speakers, so pull gently.

Pull out the motherboard by removing 4 screws around the perimeter of the motherboard. Keep in mind the wires still attached to the speakers, so pull gently.

Step 4

Using the PH0 screwdriver unscrew the screws, there is one 4 mm screw on each speaker.
Re-do the same steps above for the other speaker to remove it.

Using the PH0 screwdriver unscrew the screws, there is one 4 mm screw on each speaker.

Re-do the same steps above for the other speaker to remove it.

Step 5

Remove the speaker by using the plastic opening tool. Apply a gentle upward force to remove it.

Remove the speaker by using the plastic opening tool. Apply a gentle upward force to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      11 other people completed this guide.

Author

                                      with 2 other contributors

                    yousef aljeemaz

Member since: 10/18/2017

928 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S1-G9, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S1-G9, Cagle Fall 2017 



                    USFT-CAGLE-F17S1G9                     


                                            5 Members                     


                                            5 Guides authored

Sizino Santos - Dec 30, 2017

Where can i buy a new speaker for this sound box ? thanks… sizinojr@gmail.com

Troy - Jun 6, 2018

Did you ever find the replacement speaker? I need one too.

Thx.

mnyucel - Feb 12, 2018

Thanks, I need speaker also, where can I buy.

mnyucel@yahoo.com

mezafernando23 - Jul 10, 2018

Hi, I also need to know where could get new replacement speaker.

Thanks

Hi, I also need to know where could I get the replacement speaker.

Introduction#

What you need#

Team#

Introduction

What you need

Team