Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
1
- Microphone on/off Button
- 5 steps
Flags
0
BackHarman Kardon Invoke
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the base
- Use a metal spudger to remove the rubber bottom.
Use a metal spudger to remove the rubber bottom.
1024
Step 2
Remove the base screws
- Use a Torx #10 screwdriver to remove the four 14.0 mm screws.
Use a Torx #10 screwdriver to remove the four 14.0 mm screws.
Step 3
Remove the base
- Firmly grip the bottom and wiggle it upwards to remove the base.
Firmly grip the bottom and wiggle it upwards to remove the base.
Step 4
Unscrew the board
- Use a Torx #10 screwdriver to remove three 10.0 mm screws from the highlighted board attached to microphone button.
Use a Torx #10 screwdriver to remove three 10.0 mm screws from the highlighted board attached to microphone button.
Step 5
Remove the board
- Pull the cable lightly to disconnect the button board from device.
- To replace the microphone button, you will have to replace the entire smaller board.
Pull the cable lightly to disconnect the button board from device.
To replace the microphone button, you will have to replace the entire smaller board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Angel A. Grageda
Member since: 10/02/2018
686 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Eastern Washington University, Team S2-G2, Munoz Fall 2018
Member of Eastern Washington University, Team S2-G2, Munoz Fall 2018
EWU-MUNOZ-F18S2G2
3 Members
5 Guides authored
