Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

  • HEATER
  • 6 steps

Flags

3

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackPROTOCENTRE 999

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              HOW TO REMOVE HEATER PIN?
  • Remove the back cover of the machine.
  • Remove the heater pin from the back side of machine.

Remove the back cover of the machine.

Remove the heater pin from the back side of machine.

1024

Step 2

              REMOVING THE HEATER?
  • Remove the groove screw from the downside of nozzle.
  • Preheat the machine
  • After getting preheated, pull slowly the wires of the heater back. and remove the nozzle out.

Remove the groove screw from the downside of nozzle.

Preheat the machine

After getting preheated, pull slowly the wires of the heater back. and remove the nozzle out.

Step 3

              CHECKING THE HEATER IS HEATING
  • Reset the machine.
  • After the temperature get down full, preheat the machine
  • After 30 second check the heater is getting heated or not by slowing touch and removing your hand fastly
  • If it is not getting heating, you has to change the heater.

Reset the machine.

After the temperature get down full, preheat the machine

After 30 second check the heater is getting heated or not by slowing touch and removing your hand fastly

If it is not getting heating, you has to change the heater.

Step 4

  • First remove the heater from the wire by desoldering.
  • Take the multimeter and put it in continuity check mode and connect the two end of the wire in end of two probe of multimeter.
  • Check whether the beep sound is coming. If the beep sound come, it means the wire is good , else you has to change the wires. Same way check the other wire also.

First remove the heater from the wire by desoldering.

Take the multimeter and put it in continuity check mode and connect the two end of the wire in end of two probe of multimeter.

Check whether the beep sound is coming. If the beep sound come, it means the wire is good , else you has to change the wires. Same way check the other wire also.

Step 5

              REASSEMBLE
  • After checking these, you has to reconnect the heater in the same way you have removed before.

After checking these, you has to reconnect the heater in the same way you have removed before.

Step 6

              CHECKING THE HEATER WORKING
  • Preheat the machine
  • Go back to main menu
  • check the nozzle temperature is increasing or not.

Go back to main menu

check the nozzle temperature is increasing or not.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    abhishek j

Member since: 06/27/2017

1,169 Reputation

                                      11 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge