Difficulty
Moderate
Steps
5
Time Required
20 minutes
Sections
1
- Front Case
- 5 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackHello Zee Core Smart Case
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Case
- This model is 64GB
This model is 64GB
1024
Step 2
Opening
- Insert the spudger into a corner and separate the halves
- Do not puncture the battery
Insert the spudger into a corner and separate the halves
Do not puncture the battery
Step 3
Main board unmounting
- Use your spudger’s pointed tip to unscrew the screws
Use your spudger’s pointed tip to unscrew the screws
Step 4
Board removal
- Use your spudger to pry up the board from the sides
- Do not break it
- Do not pry from the battery side
Use your spudger to pry up the board from the sides
Do not break it
Do not pry from the battery side
Step 5
Electronics removal
- CAREFULLY pry under the battery to remove it
- there are no permanent adhesives, though there may be sticky tape
- Spectate everything from the case
CAREFULLY pry under the battery to remove it
there are no permanent adhesives, though there may be sticky tape
Spectate everything from the case
To reassemble your device, follow these instructions in reverse order, using your replacement case instead of the one described.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Bobrobot1
Member since: 07/13/2018
3,904 Reputation
24 Guides authored
Badges:
20
+17 more badges
