Difficulty
Moderate
Steps
5
Time Required
10 - 15 minutes
Sections
2
- Rear Case
- 2 steps
- Speaker
- 3 steps
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackHipstreet Equinox 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Remove the two 3mm screws using a PH00 screwdriver.
Remove the two 3mm screws using a PH00 screwdriver.
1024
Step 2
- Use the blue plastic opening tool to gently pry the back case off.
Use the blue plastic opening tool to gently pry the back case off.
Step 3
Speaker
- Use a plastic opening tool to remove the speakers from the case.
- Desolder the wires from the motherboard.
- Be sure to note which wire, red or black, corresponds to which connection on the motherboard.
Use a plastic opening tool to remove the speakers from the case.
Desolder the wires from the motherboard.
Be sure to note which wire, red or black, corresponds to which connection on the motherboard.
Step 4
- Solder the wires of the new speaker to the motherboard as shown in the image.
Solder the wires of the new speaker to the motherboard as shown in the image.
Step 5
- Glue the speakers flat against their respective sound output panels with the silver sides facing out/towards the interior of the tablet.
Glue the speakers flat against their respective sound output panels with the silver sides facing out/towards the interior of the tablet.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Joel Miller
Member since: 01/29/2015
119 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Clemson, Team 15-8, Shirley Winter 2015
Member of Clemson, Team 15-8, Shirley Winter 2015
CLEM-SHIRLEY-W15S15G8
5 Members
12 Guides authored
