Difficulty
Moderate
Steps
5
Time Required
20 minutes
Sections
1
- Nail Magazine
- 5 steps
Flags
0
BackHitachi Nailer NR83A2 (2011)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Video Overview
Step 1
Nail Magazine
- Place the nailer on a flat, sturdy surface.
Place the nailer on a flat, sturdy surface.
1024
Step 2
- Unscrew both sides of the nail by moving your hex socket tool left.
- The right is always to tighten, and the left is to loosen up.
Unscrew both sides of the nail by moving your hex socket tool left.
The right is always to tighten, and the left is to loosen up.
Step 3
- Remove the screws.
- Remove the magazine.
- It should easily slide out.
Remove the screws.
Remove the magazine.
It should easily slide out.
Step 4
- Place the new magazine and screw the bolts back into their place. There are no hidden tricks. It’s just placing the magazine and tightening it up so it won’t fall off.
Place the new magazine and screw the bolts back into their place. There are no hidden tricks. It’s just placing the magazine and tightening it up so it won’t fall off.
Step 5
- The final product should look as if it were not touched. You have your new magazine in!
The final product should look as if it were not touched. You have your new magazine in!
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Brandon
Member since: 08/26/2022
121 Reputation
1 Guide authored
Badges:
2
Team
CSU Los Angeles, Team 2-2, Briggs Fall 2022
Member of CSU Los Angeles, Team 2-2, Briggs Fall 2022
CSULA-BRIGGS-F22S2G2
1 Member
1 Guide authored