Hmdx Chill Charging Port Replacement Repair Guide

Difficulty

Difficult

Steps

9

Time Required

Suggest a time??

Sections

3

• HMDX Chill Disassembly
• 3 steps
• Motherboard
• 5 steps
• Charging Port
• 1 step

Flags

0

• BackHMDX Chill

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove Rubber Base               

• Insert a metal spudger under the rubber base.
• Pry the rubber base off.

Insert a metal spudger under the rubber base.

Pry the rubber base off.

1024

Step 2

• Use a Phillips #1 screwdriver to remove four 9 mm screws from the base of the device.

Use a Phillips #1 screwdriver to remove four 9 mm screws from the base of the device.

Step 3

• Grip the base of the HMDX Chill.
• Pull the base upwards.

Grip the base of the HMDX Chill.

Pull the base upwards.

Step 4

              Motherboard               

• Use a Phillips #1 screwdriver to remove the four 6 mm screws that secure the motherboard to the base of the device.

Use a Phillips #1 screwdriver to remove the four 6 mm screws that secure the motherboard to the base of the device.

Step 5

• Pull the motherboard away from the base gently.
• Do not pull too hard on the motherboard. It is still attached to the base by wires.

Pull the motherboard away from the base gently.

Do not pull too hard on the motherboard. It is still attached to the base by wires.

Step 6

• Use a soldering iron to desolder the wires connecting the motherboard to the case.

Use a soldering iron to desolder the wires connecting the motherboard to the case.

Step 7

• Insert the spudger between the case and the wire and move the spudger upwards.
• This will cause the case to prop open.
• The wire behind the motherboard will now be visible. Pull this out from behind.

Insert the spudger between the case and the wire and move the spudger upwards.

This will cause the case to prop open.

The wire behind the motherboard will now be visible. Pull this out from behind.

Step 8

• Use the soldering iron to desolder the wires connecting the motherboard to the base of the HMDX Chill.

Use the soldering iron to desolder the wires connecting the motherboard to the base of the HMDX Chill.

Step 9

              Desolder the Charging Port               

• Using a soldering tool, desolder the charging port from the motherboard.

Using a soldering tool, desolder the charging port from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Jourdan Holubasch                     

Member since: 03/31/2016

754 Reputation

                                      7 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       EWU-Giguere-S16S1G1                        

                                                  Member of EWU-Giguere-S16S1G1 



                    Community                     


                                            4 Members                     


                                            7 Guides authored                     

Aaron Hughes - Aug 25, 2017

Reply

I have the charging port removed. Where do I find a replacement??