Holmes Hbf2002A W Blade Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 minutes - 1 hour            

Sections

1

• Fan Blade
• 7 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackHolmes HBF2002A-W

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Fan Blade               

• In the marker, we have the screw that connects the fan to the box. Now using your tool, remove six 2mm Phillips #2 screws.

In the marker, we have the screw that connects the fan to the box. Now using your tool, remove six 2mm Phillips #2 screws.

1024

Step 2

• Next remove four 2mm screws on the blade itself, that holds the fan in place. So that way we can remove the fan out of the box.

Next remove four 2mm screws on the blade itself, that holds the fan in place. So that way we can remove the fan out of the box.

Step 3

• Be careful with this part. You have to remove the blade out of the box and can be a little difficult but it will get better when it starts to get out.
• This fan blade will be removed and the new one will be replaced. The fan blade can be popped off. Once done, place the new one back on.

Be careful with this part. You have to remove the blade out of the box and can be a little difficult but it will get better when it starts to get out.

This fan blade will be removed and the new one will be replaced. The fan blade can be popped off. Once done, place the new one back on.

Step 4

• Once the new one is in place again. Place the screws back in.

Once the new one is in place again. Place the screws back in.

Step 5

• Put the screws back inside to make sure the fan doesn’t pop out of the box and harm anyone.

Put the screws back inside to make sure the fan doesn’t pop out of the box and harm anyone.

Step 6

• Keep screwing in the rest of your screws into the fan before continuing on the last step.

Keep screwing in the rest of your screws into the fan before continuing on the last step.

Step 7

• Once you screw in the last one, go ahead and plug in the fan.
• When plugging in the fan. Make sure the fan is not turned on or else you will harm yourself or others.

Once you screw in the last one, go ahead and plug in the fan.

When plugging in the fan. Make sure the fan is not turned on or else you will harm yourself or others.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Andrea Malave                     

Member since: 05/18/2018

175 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Pasco Hernando, Team S5-G31, Prince Summer 2018                        

                                                  Member of Pasco Hernando, Team S5-G31, Prince Summer 2018 



                    PHSC-PRINCE-SU18S5G31                     


                                            1 Member                     


                                            1 Guide authored                     

G Ott - Jul 12, 2019

Reply

Wow, the step with removing the motor from it’s mount of the 4 screws is totally unnecessary! You obviously have not done these too often — all you have to do is to remove the FRONT fan shroud, and then pull the fan blade (or what’s left of it if replacing) from the front of the motor! WAY too much work with how you explained it here!