Difficulty
Easy
Steps
4
Time Required
10 - 15 minutes
Sections
1
- Safety Switch
- 4 steps
Flags
0
BackHomelite UT44172
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Opening the device
- Remove the six 1.5 cm screws marked on the picture from the plastic casing with a Phillips #2 screwdriver.
Remove the six 1.5 cm screws marked on the picture from the plastic casing with a Phillips #2 screwdriver.
1024
Step 2
Remove Faceplate
- Remove the faceplate to expose the inner mechanisms.
Remove the faceplate to expose the inner mechanisms.
Step 3
Switch Removal
- Remove the safety switch by pulling it away from the body of device.
- Be careful not to lose the spring, which is under pressure and may fly out during removal.
Remove the safety switch by pulling it away from the body of device.
Be careful not to lose the spring, which is under pressure and may fly out during removal.
Step 4
Spring Replacement
- Inspect both the spring and the switch to see if either is deformed or damaged. If so, replace the damaged part with a new part.
- During reassembly, gently move the inner wires out of the way so they do not get caught in the spring.
Inspect both the spring and the switch to see if either is deformed or damaged. If so, replace the damaged part with a new part.
During reassembly, gently move the inner wires out of the way so they do not get caught in the spring.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Daniel Endericavillacis
Member since: 01/25/2015
101 Reputation
1 Guide authored
Badges:
3
Team
USF Tampa, Team 17-5, Watkins Winter 2015
Member of USF Tampa, Team 17-5, Watkins Winter 2015
USFT-WATKINS-W15S17G5
3 Members
4 Guides authored
