Difficulty
Easy
Steps
10
Time Required
15 - 25 minutes
Sections
1
- Cabin Air Filter
- 10 steps
Flags
0
BackHonda CR-V Touring 2016
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cabin Air Filter
- Ensure that your 2016 Honda CR-V Touring Edition is off.
- Open the glovebox and remove all of its contents.
Ensure that your 2016 Honda CR-V Touring Edition is off.
Open the glovebox and remove all of its contents.
1024
Step 2
- Unfasten the hinge on the right side of your glovebox so the hook-part of the hinge is free and clear.
- You may have to close the glovebox slightly, then open it fully while holding the hook to clear it.
Unfasten the hinge on the right side of your glovebox so the hook-part of the hinge is free and clear.
You may have to close the glovebox slightly, then open it fully while holding the hook to clear it.
Step 3
- Push both sides of the glovebox together while lowering until the glovebox hangs at its lowest point.
- This should allow access to the interior and give a clear line of sight to the cabin air filter holder.
Push both sides of the glovebox together while lowering until the glovebox hangs at its lowest point.
This should allow access to the interior and give a clear line of sight to the cabin air filter holder.
Step 4
- Grasp both clasps on either side of the rectangular cabin air filter protective cover and pull to release the cover.
- You should see a white filter.
Grasp both clasps on either side of the rectangular cabin air filter protective cover and pull to release the cover.
You should see a white filter.
Step 5
- Pull the filter straight out until it is free and clear.
- Be sure not to shake it to prevent any excess dust from falling.
Pull the filter straight out until it is free and clear.
Be sure not to shake it to prevent any excess dust from falling.
Step 6
- Insert the new filter, taking care to orient the filter in the correct direction for airflow.
- It will be marked with arrows both on the filter and below the location for the filter.
Insert the new filter, taking care to orient the filter in the correct direction for airflow.
It will be marked with arrows both on the filter and below the location for the filter.
Step 7
- Place the cabin air filter protective cover over top of the filter until you hear audible clicks from the clasps engaging.
Place the cabin air filter protective cover over top of the filter until you hear audible clicks from the clasps engaging.
Step 8
- Push the glovebox up until you feel a detent where it is self supported but is not fully in the up-position.
Push the glovebox up until you feel a detent where it is self supported but is not fully in the up-position.
Step 9
- Re-clip the hook on the right side of the glovebox until it is fully engaged.
Re-clip the hook on the right side of the glovebox until it is fully engaged.
Step 10
- Close the glovebox and you’re all set!
Close the glovebox and you’re all set!
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Oliver Du Bois
Member since: 01/29/2020
223 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Embry-Riddle Aeronautical University, Team S11-G7, Salas Spring 2020
Member of Embry-Riddle Aeronautical University, Team S11-G7, Salas Spring 2020
ERAU-SALAS-S20S11G7
2 Members
1 Guide authored
