Honeywell Quietset Hy5260Bc Fan Blades Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          55 minutes - 1 hour            

Sections

1

• Fan Blades
• 10 steps

Flags

4

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackHoneywell Quietset HY5260BC

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Fan Blades               

• To avoid any risk of electrocution, unplug the fan from the power outlet.
• Lay the fan horizontally and remove the base by unscrewing the locking nut from the fan housing.

To avoid any risk of electrocution, unplug the fan from the power outlet.

Lay the fan horizontally and remove the base by unscrewing the locking nut from the fan housing.

1024

Step 2

• Remove the 3” wing screw on the bottom of the fan.
• Remove the 3” screws (4) on top of the fan
• The screw heads are starbit so a starbit screwdriver is required for this process.

Remove the 3” wing screw on the bottom of the fan.

Remove the 3” screws (4) on top of the fan

The screw heads are starbit so a starbit screwdriver is required for this process.

Step 3

• Carefully open up the fan housing in half by pulling the front and back parts away from each other. The motor attached with the fan blade should be seen.
• This may require a large amount of force so be careful not to hurt yourself. You can use a plastic tool to separate the parts to make it easier.

Carefully open up the fan housing in half by pulling the front and back parts away from each other. The motor attached with the fan blade should be seen.

This may require a large amount of force so be careful not to hurt yourself. You can use a plastic tool to separate the parts to make it easier.

Step 4

• Remove the screw connecting the motor shaft with the bottom half of the fan blade.

Remove the screw connecting the motor shaft with the bottom half of the fan blade.

Step 5

• Remove the two screws connecting the metal bracket with the fan blade. The metal bracket can be taken out now.

Remove the two screws connecting the metal bracket with the fan blade. The metal bracket can be taken out now.

Step 6

• Carefully take the fan blades out by grabbing them firmly and lifting it towards us.
• Gently clean the inner surface of the fan with a cloth or vacuum cleaner to clean all the dust that it has collected over the period of usage.

Carefully take the fan blades out by grabbing them firmly and lifting it towards us.

Gently clean the inner surface of the fan with a cloth or vacuum cleaner to clean all the dust that it has collected over the period of usage.

Step 7

• To fix the rattling noise, carefully apply lubricating grease around the blade drum’s shaft.

To fix the rattling noise, carefully apply lubricating grease around the blade drum’s shaft.

Step 8

• Lubricate the metal bracket’s tab and around the screw holes.
• During reassembly, try to put a liquid rubber on its top surface to prevent friction, for fixing the squeaky noise these fan fan after using them for several months.’''
• Make sure not to drop any of the lubricants onto the bearing!

Lubricate the metal bracket’s tab and around the screw holes.

During reassembly, try to put a liquid rubber on its top surface to prevent friction, for fixing the squeaky noise these fan fan after using them for several months.’''

Make sure not to drop any of the lubricants onto the bearing!

Step 9

• Slowly place the new fan blades in making sure we put them in the correct alignment.
• The slots on the fan blades and centre column need to be aligned perfectly.

Slowly place the new fan blades in making sure we put them in the correct alignment.

The slots on the fan blades and centre column need to be aligned perfectly.

Step 10

• To stop the new fan blades from vibrating, adjust the screws around the metal bracket and motor shaft tightly. Place the other half of the case and screw it again in place.
• It is important to connect/adjust all parts of the tower fan securely in place to avoid noise.

To stop the new fan blades from vibrating, adjust the screws around the metal bracket and motor shaft tightly. Place the other half of the case and screw it again in place.

It is important to connect/adjust all parts of the tower fan securely in place to avoid noise.

To reassemble your device, follow these instructions in reverse order. Follow this guide to self-service your tower fan yourself saving lots of money!

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    fabiha tarannum                     

Member since: 01/21/2021

181 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S1-G31, Melo-Thaiss Winter 2021                        

                                                  Member of York University, Team S1-G31, Melo-Thaiss Winter 2021 



                    YORK-MELO-THAISS-W21S1G31                     


                                            1 Member                     


                                            1 Guide authored                     

Dan Man - Jun 28, 2022

Reply

Where can I buy the fan blades