Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

2

  • Brush Roller
  • 3 steps
  • Belt
  • 5 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackHoover Power Path Pro Advanced

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Brush Roller
  • Unplug the vacuum cleaner from the wall outlet before starting. Make sure the water tanks are empty.
  • Lay the cleaner down horizontally with its wheels closest to the floor.

Unplug the vacuum cleaner from the wall outlet before starting. Make sure the water tanks are empty.

Lay the cleaner down horizontally with its wheels closest to the floor.

1024

Step 2

  • Hold the lower brush roll with both hands and pull outwards until it is detached.

Hold the lower brush roll with both hands and pull outwards until it is detached.

Step 3

  • Unscrew the 6 marked screws using a Phillips #2 head screwdriver.
  • Remove the brush roller.

Unscrew the 6 marked screws using a Phillips #2 head screwdriver.

Remove the brush roller.

Step 4

              Belt
  • Use a long #2 Philips head screwdriver to remove the 8 numbered screws on the bottom of the cleaner.

Use a long #2 Philips head screwdriver to remove the 8 numbered screws on the bottom of the cleaner.

Step 5

  • Pull the red handle shown to remove the front suction unit from the cleaner.

Pull the red handle shown to remove the front suction unit from the cleaner.

Step 6

  • Unscrew the Phillips #2 screw at the bottom of the hose.

Unscrew the Phillips #2 screw at the bottom of the hose.

Step 7

  • Push down on the handle release button. Pull and disconnect the edge of the top cover on the side of the handle release button.
  • Repeat the above step for the “On/Off” button.
  • When pulling the handle release button, make sure the top of the cleaner does not fall.

Push down on the handle release button. Pull and disconnect the edge of the top cover on the side of the handle release button.

Repeat the above step for the “On/Off” button.

When pulling the handle release button, make sure the top of the cleaner does not fall.

Step 8

  • Gently grab the belt and pry it off from the rollers.

Gently grab the belt and pry it off from the rollers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 4 other contributors 


                    Jose Andres Gonzalez Valdes

Member since: 01/22/2018

682 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team S16-G5, Banghart Winter 2018                        

                                                  Member of Cal Poly, Team S16-G5, Banghart Winter 2018 



                    CPSU-BANGHART-W18S16G5                     


                                            5 Members                     


                                            15 Guides authored

Roy Merlino - Aug 18, 2021

Reply

Who the heck made this so hard,

Roy Merlino - Aug 27, 2021

Reply

Day 5 and 4 people, I still can’t lift the top off to be able to replace belts. Is there a video

Neil Sullivan - Jun 10, 2022

Reply

Just understand there are more screws to remove then what is described in these 8 steps. Once you removed ALL the screws then the plastic lid comes right off.

Loretta Staley - Oct 30, 2022

Reply

How the back do you put the too belts on and seeing how the bag came with two and both were wide what size is the one that goes around the roller the other one control the circle brushes this is one of the most difficult belt change I’ve bad and I’m counting on car to