Hoover Windtunnel Air Steerable Upright Suction Hose Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 - 7 minutes            

Sections

1

• Suction Hose
• 4 steps

Flags

0

• BackHoover Windtunnel Air Steerable Upright

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Suction Hose               

• Turn the power off and unplug the power cord.
• Set the cleaner in the upright position.

Turn the power off and unplug the power cord.

Set the cleaner in the upright position.

1024

Step 2

• Dislodge hose from plastic clips for ease of removal.

Dislodge hose from plastic clips for ease of removal.

Step 3

• Press firmly on the hose button and slide hose out.

Press firmly on the hose button and slide hose out.

Step 4

• Pull the hose out of the top of the vacuum.
• The hose is connected to the vacuum handle.
• The bottom of the hose should come out when the top of the hose is pulled away from the vacuum.

Pull the hose out of the top of the vacuum.

The hose is connected to the vacuum handle.

The bottom of the hose should come out when the top of the hose is pulled away from the vacuum.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    steven hoover                     

Member since: 09/26/2017

250 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team S7-G2, Banghart Fall 2017                        

                                                  Member of Cal Poly, Team S7-G2, Banghart Fall 2017 



                    CPSU-BANGHART-F17S7G2                     


                                            5 Members                     


                                            14 Guides authored                     

Mike - Oct 6, 2020

Reply

what might my problem be? I will start vacuuming and the noise will change to an almost “air escaping” sound and it loses suction. It will make this sound when the filter is very dirty or when the bag is full.

Currently neither of these two things are applicable but it does it almost immediately after turning on. The sound change seems to be coming from the top of the main unit near the handle.