Hoover Windtunnel Air Steerable Upright Wheel Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          4 - 10 minutes            

Sections

1

• Wheel
• 4 steps

Flags

0

• BackHoover Windtunnel Air Steerable Upright

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Wheel               

• Lay the vacuum flat on the ground, then flip it over 180 degrees so that you can see the inside of the wheel.

Lay the vacuum flat on the ground, then flip it over 180 degrees so that you can see the inside of the wheel.

1024

Step 2

• Locate the small metal pin and bolt holding the wheel in place.

Locate the small metal pin and bolt holding the wheel in place.

Step 3

• Take the needle nose pliers and stick them in the rectangular hole.
• With the pliers, firmly grasp the metal pin that holds the bolt for the wheel in place.
• Slide the pin off the bolt by pushing the pliers forward.
• Carefully remove the pin from the rectangular hole and keep it in a safe place.

Take the needle nose pliers and stick them in the rectangular hole.

With the pliers, firmly grasp the metal pin that holds the bolt for the wheel in place.

Slide the pin off the bolt by pushing the pliers forward.

Carefully remove the pin from the rectangular hole and keep it in a safe place.

Step 4

• Now, remove the wheel by pulling it away from the vacuum.
• The bolt will come out with the wheel since the pin is gone.

Now, remove the wheel by pulling it away from the vacuum.

The bolt will come out with the wheel since the pin is gone.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Wyatt Cornelison                     

Member since: 09/26/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team S7-G2, Banghart Fall 2017                        

                                                  Member of Cal Poly, Team S7-G2, Banghart Fall 2017 



                    CPSU-BANGHART-F17S7G2                     


                                            5 Members                     


                                            14 Guides authored