Hot Wheels Ai Intelligent Race System Controller Transmitter Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

1

• Controller Transmitter
• 5 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackHot Wheels AI Intelligent Race System

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Controller Transmitter               

• Locate and remove the six screws on the back of the controller. Remove screws with a #J1 Philips head screwdriver.

Locate and remove the six screws on the back of the controller. Remove screws with a #J1 Philips head screwdriver.

1024

Step 2

• With the controller facing down remove the top casing from the bottom. Do this by popping the casing lose which will expose the inside circuits.

With the controller facing down remove the top casing from the bottom. Do this by popping the casing lose which will expose the inside circuits.

Step 3

• With the circuits exposed locate the transmitter at the top of the controller. It is green hue in comparison to the rest of the blue circuits. Check the transmitter for damage or disconnected wires.

With the circuits exposed locate the transmitter at the top of the controller. It is green hue in comparison to the rest of the blue circuits. Check the transmitter for damage or disconnected wires.

Step 4

• If transmitter has broken or has disconnected wires it may need replacement. Wires can easily break loose from the transmitter. The wires can easily be reinserted by sticking the wire back into its original slot.

If transmitter has broken or has disconnected wires it may need replacement. Wires can easily break loose from the transmitter. The wires can easily be reinserted by sticking the wire back into its original slot.

Step 5

• If the transmitter is damaged, replace it by sliding the circuit down from its slot. Check for damage or burned out circuit.
• Replace transmitter circuit with a new one by reinserting it into the original slot.

If the transmitter is damaged, replace it by sliding the circuit down from its slot. Check for damage or burned out circuit.

Replace transmitter circuit with a new one by reinserting it into the original slot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Luke Marshall                     

Member since: 09/07/2018

625 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Appalachian State University, Team S1-G2, Menagarishvili Fall 2018                        

                                                  Member of Appalachian State University, Team S1-G2, Menagarishvili Fall 2018 



                    APSU-MENAGARISHVILI-F18S1G2                     


                                            2 Members                     


                                            6 Guides authored                     

Luis Vitorio Cargnini - Dec 29, 2019

Reply

Give the part numbers so we can source the circuits and change the devices if needed. Also can anyone extract the rim? I believe the rim being used is way low quality.