Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

  • AcuRite 02081M Observer Repair
  • 4 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHousehold Item

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

“The sensor itself is ergonomically designed – simple remote style machine with a small hanger on the top. Capable of being hung either via a screw, nail, or small strings, you can put this sensor wherever you think best – such as a porch, outside wall, or even a tree branch. .” -Weather Station Experts Review

Manufacturer’s Website: AcuRite 02081M

Step 1

              AcuRite 02081M Observer Repair
  • First, unscrew the 4 M2x1.5-7 screws (7mm length) from the back of the device using a number 1 Phillips screwdriver.
  • Pry the front silver panel away from the back black panel with a plastic opening tool.

First, unscrew the 4 M2x1.5-7 screws (7mm length) from the back of the device using a number 1 Phillips screwdriver.

Pry the front silver panel away from the back black panel with a plastic opening tool.

1024

Step 2

  • Next, the ribbon cable needs to be carefully removed from the back of the LCD screen.
  • Use a plastic opening tool to press the black bar towards the ribbon and away from the white bar gently. This will release the ribbon.

Next, the ribbon cable needs to be carefully removed from the back of the LCD screen.

Use a plastic opening tool to press the black bar towards the ribbon and away from the white bar gently. This will release the ribbon.

Step 3

  • Remove the 4 M2x1.5-7 screws (7mm length) from the green PCB board.
  • This will result in two pieces, the back black cover and the PCB board.

Remove the 4 M2x1.5-7 screws (7mm length) from the green PCB board.

This will result in two pieces, the back black cover and the PCB board.

Step 4

  • The battery can then be popped out using precision tweezers and replaced with a new one.

The battery can then be popped out using precision tweezers and replaced with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    anhut51190

Member since: 07/04/2019

257 Reputation

                                      2 Guides authored                  



                       Badges:
                       2