Hover 1 Eagle Back Wheel Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 - 20 minutes

Sections

Back Wheel
6 steps

Flags

BackHover-1 Eagle
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Wheel

Peel off the reflective red axle sticker using a plastic spudger.

Peel off the reflective red axle sticker using a plastic spudger.

1024

Step 2

Use a Phillips #2 screwdriver to remove the 2mm screw located underneath the reflective sticker.

Use a Phillips #2 screwdriver to remove the 2mm screw located underneath the reflective sticker.

Step 3

Grip the deck flare and slide it towards the tail end of the scooter.

Grip the deck flare and slide it towards the tail end of the scooter.

Step 4

Remove the 6 mm axle screws by using a hex bit 5.0.
Make sure to try loosening both sides. One of the axle screws spins freely and will not loosen.

Remove the 6 mm axle screws by using a hex bit 5.0.

Make sure to try loosening both sides. One of the axle screws spins freely and will not loosen.

Step 5

Repeat Steps 1-3 for the other side.
Apply pressure to the axle using a hex bit 5.0 to push it slightly out on the other side.
Take hold of the 6 mm axle screw on the opposite side and remove the axle by pulling firmly towards you.

Repeat Steps 1-3 for the other side.

Apply pressure to the axle using a hex bit 5.0 to push it slightly out on the other side.

Take hold of the 6 mm axle screw on the opposite side and remove the axle by pulling firmly towards you.

Step 6

Pull backwards to remove the back wheel.
Washers may fall when the wheel is removed, so make sure to catch or gather the washers.

Pull backwards to remove the back wheel.

Washers may fall when the wheel is removed, so make sure to catch or gather the washers.

To reassemble your device, repeat Steps 1-4 in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors

                    Andrew Gaskell

Member since: 01/23/2020

876 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team S1-G2, White Winter 2020                        

                                                  Member of Cal Poly, Team S1-G2, White Winter 2020 



                    CPSU-WHITE-W20S1G2                     


                                            4 Members                     


                                            5 Guides authored

antonio flores - Aug 25, 2020

Where do you buy the wheels

Thanks

Introduction#

What you need#

Team#

Introduction

What you need

Team