Hover 1 H1 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          30 minutes            

Sections

2

• Bottom Shell
• 4 steps
• Battery
• 2 steps

Flags

1

Featured Student Guide

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

• BackHover-1 H1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Bottom Shell               

• Remove the ten 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.
• Remove the twelve 9mm sheet metal screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

Remove the ten 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

Remove the twelve 9mm sheet metal screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

1024

Step 2

• Puncture the two black stickers by using the tip of a screwdriver.
• Remove the two 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

Puncture the two black stickers by using the tip of a screwdriver.

Remove the two 9mm machine screws by using a long Phillips #2 screwdriver to rotate the screws counterclockwise.

Step 3

• Lift each side of the bottom shell by pulling up.
• When lifting the shell, take care to not tear any cables from their connectors.

Lift each side of the bottom shell by pulling up.

When lifting the shell, take care to not tear any cables from their connectors.

Step 4

• Unplug the battery by pulling gently on both sides of the orange connector.

Unplug the battery by pulling gently on both sides of the orange connector.

Step 5

              Battery               

• Remove the four 7mm screws by using a Phillips #2 screwdriver to rotate the screws counterclockwise.

Remove the four 7mm screws by using a Phillips #2 screwdriver to rotate the screws counterclockwise.

Step 6

• Gently lift the battery harness and remove the battery by lifting the battery and moving it away from the hoverboard.

Gently lift the battery harness and remove the battery by lifting the battery and moving it away from the hoverboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Aaron Teh                     

Member since: 10/08/2018

337 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team S17-G6, White Fall 2018                        

                                                  Member of Cal Poly, Team S17-G6, White Fall 2018 



                    CPSU-WHITE-F18S17G6                     


                                            4 Members                     


                                            7 Guides authored                     

Daniel D - Oct 7, 2021

Reply

The stickers were the trick. I didn’t see them!

Terry Pollard - May 17, 2022

Reply

After removing the 4 screws that is holding the battery in place I still can’t remove the battery. I tried gently to pry under the battery but it doesn’t budge. Uni Sun model HY-A01B. How do I solve this problem?

Tony Pate - Dec 30, 2022

Reply

Where do I get another battery to replace it???