Hover 1 Horizon Power Button Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          15 minutes            

Sections

2

• Base Plate
• 3 steps
• Power Button
• 4 steps

Flags

0

• BackHover-1 Horizon

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Base Plate               

• Remove the six 12mm Phillips #2 screws holding the base plate.

Remove the six 12mm Phillips #2 screws holding the base plate.

1024

Step 2

• Remove the two 11mm Phillips #1 screws that hold the base plate to the body.

Remove the two 11mm Phillips #1 screws that hold the base plate to the body.

Step 3

• Remove the base plate by lifting it up.
• The base plate is connected to the body with wires. The wires are long enough to set the base plate to the side.

Remove the base plate by lifting it up.

The base plate is connected to the body with wires. The wires are long enough to set the base plate to the side.

Step 4

              Power Button               

• Reorient the Hover-1 Horizon so the base plate opens towards you.

Reorient the Hover-1 Horizon so the base plate opens towards you.

Step 5

• Remove the connector by squeezing the tab and lifting up.

Remove the connector by squeezing the tab and lifting up.

Step 6

• Remove the second connector by squeezing the tab and pulling up.

Remove the second connector by squeezing the tab and pulling up.

Step 7

• Unscrew the power button by holding the front and twisting the back nut counter-clockwise.
• Push the power button through the base plate to remove.
• A hot air gun may need to be used to remove the adhesive connecting the base plate to the power button.

Unscrew the power button by holding the front and twisting the back nut counter-clockwise.

Push the power button through the base plate to remove.

A hot air gun may need to be used to remove the adhesive connecting the base plate to the power button.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Christina Fong                     

Member since: 10/08/2018

165 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Cal Poly, Team S13-G6, White Fall 2018                        

                                                  Member of Cal Poly, Team S13-G6, White Fall 2018 



                    CPSU-WHITE-F18S13G6                     


                                            4 Members                     


                                            6 Guides authored