Difficulty
Moderate
Steps
6
Time Required
Suggest a time??
Sections
2
- Motherboard
- 4 steps
- Foot Mats
- 2 steps
Flags
1
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackHover-1 Maverick
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.
- Open the shell.
- There is one motherboard on each side of the device located near the wheels.
Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.
Open the shell.
There is one motherboard on each side of the device located near the wheels.
1024
Step 2
- Disconnect the battery to prevent any electrical currents from coming through the wires.
Disconnect the battery to prevent any electrical currents from coming through the wires.
Step 3
- Squeeze and pull on the wires to detach them from the motherboard.
Squeeze and pull on the wires to detach them from the motherboard.
Step 4
- Remove the four 8mm Phillips #1 screws.
- Remove the motherboard from the device.
- Repeat for the other motherboard.
Remove the four 8mm Phillips #1 screws.
Remove the motherboard from the device.
Repeat for the other motherboard.
Step 5
Foot Mats
- Remove six 1mm Phillips #1 screws.
Remove six 1mm Phillips #1 screws.
Step 6
- Remove the foot mats from the top of the board, which is facing down right now.
Remove the foot mats from the top of the board, which is facing down right now.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Piper Feldman
Member since: 01/23/2020
391 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
Cal Poly, Team S2-G2, White Winter 2020
Member of Cal Poly, Team S2-G2, White Winter 2020
CPSU-WHITE-W20S2G2
2 Members
4 Guides authored
