Difficulty
Moderate
Steps
6
Time Required
10 - 20 minutes
Sections
2
- Front Brake
- 3 steps
- Front Wheel
- 3 steps
Flags
0
BackHover-1 XLS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Brake
- Remove the two, 23 mm Hex #5 screws holding the brake to the bike.
- Slide the brake mechanism off and turn it upside down to reveal the screw holding the brake wire.
Remove the two, 23 mm Hex #5 screws holding the brake to the bike.
Slide the brake mechanism off and turn it upside down to reveal the screw holding the brake wire.
1024
Step 2
- Remove the one, 14 mm Hex #4 screw pushing down the brake wire to the brake mechanism on the bottom.
Remove the one, 14 mm Hex #4 screw pushing down the brake wire to the brake mechanism on the bottom.
Step 3
- Remove the side screw holding the brake wire and mechanism together with your hands.
- Slide the brake mechanism off from the brake wire.
Remove the side screw holding the brake wire and mechanism together with your hands.
Slide the brake mechanism off from the brake wire.
Step 4
Front Wheel
- Remove the two, 16 mm Hex #4 screws on both of the hub caps in the front wheel.
- There are two hub caps on the front wheel. Make sure to remove two screws for both hub caps.
Remove the two, 16 mm Hex #4 screws on both of the hub caps in the front wheel.
There are two hub caps on the front wheel. Make sure to remove two screws for both hub caps.
Step 5
- Using an adjustable spanner wrench, rotate the 165 mm bolt counter-clockwise to remove.
Using an adjustable spanner wrench, rotate the 165 mm bolt counter-clockwise to remove.
Step 6
- After removing the first bolt, the second bolt located on the other side of the wheel will be able to be take off by hand.
- Pull the wheel and bike in opposite directions to remove the wheel.
After removing the first bolt, the second bolt located on the other side of the wheel will be able to be take off by hand.
Pull the wheel and bike in opposite directions to remove the wheel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Jonathan Hidalgo
Member since: 01/24/2019
575 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team S1-G2, White Winter 2019
Member of Cal Poly, Team S1-G2, White Winter 2019
CPSU-WHITE-W19S1G2
3 Members
6 Guides authored
petrasherbin - May 21, 2021
Reply
How do I get in touch with customer service for parts?
tried filling out the form on computer and phone as well tablet and it says error.
please reach out
