How To Adjust A Buttonhole Size Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 30 minutes

Sections

How to Adjust a Buttonhole Size
8 steps

Flags

Featured Student Guide

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

BackClothing
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Would you like to change the look of a garment by changing all the buttons to new ones? To do this, you may need to shorten or lengthen the buttonholes.

Adjusting buttonholes is not difficult. This guide will show you the steps to this useful skill.

What you need

Step 1

              How to Adjust a Buttonhole Size

Steps 1-3 demonstrate how to shorten a buttonhole when the button will not stay buttoned or needs to be replaced with a smaller button.
Using the ruler, measure the button you intend to use. Add 1/8” to this measurement for ease of buttoning.

Steps 1-3 demonstrate how to shorten a buttonhole when the button will not stay buttoned or needs to be replaced with a smaller button.

Using the ruler, measure the button you intend to use. Add 1/8” to this measurement for ease of buttoning.

1024

Step 2

Measure down from the top of the existing buttonhole to the length of your Step 1 measurement.
Make a small sewing chalk mark or insert a straight pin to mark how long your adjusted buttonhole should be.

Measure down from the top of the existing buttonhole to the length of your Step 1 measurement.

Make a small sewing chalk mark or insert a straight pin to mark how long your adjusted buttonhole should be.

Step 3

Use either a sewing machine or needle and thread for this step.
Match the stitch width of the existing bar tack, and sew a new bar tack at the location of your chalk mark.
A bar tack is several long, narrowly spaced stitches that form the top of a T between shorter perpendicular stitches.
Check to make sure your button fits your adjusted buttonhole well.

Use either a sewing machine or needle and thread for this step.

Match the stitch width of the existing bar tack, and sew a new bar tack at the location of your chalk mark.

A bar tack is several long, narrowly spaced stitches that form the top of a T between shorter perpendicular stitches.

Check to make sure your button fits your adjusted buttonhole well.

Step 4

Steps 4-8 demonstrate how to lengthen a buttonhole if it is too tight for your button or if you want to sew on larger buttons.
Using the ruler, measure the button you intend to use. Add 1/8” to this measurement for ease of buttoning.

Steps 4-8 demonstrate how to lengthen a buttonhole if it is too tight for your button or if you want to sew on larger buttons.

Step 5

With the ruler, measure down from the top of the existing buttonhole to the length of your Step 4 measurement.
Make a small sewing chalk mark or insert a straight pin on the fabric at this place.

With the ruler, measure down from the top of the existing buttonhole to the length of your Step 4 measurement.

Make a small sewing chalk mark or insert a straight pin on the fabric at this place.

Step 6

Starting on the right of the existing buttonhole, stitch to your chalk mark or pin, matching the width of the original stitching.
Stitch a new bar tack.
A bar tack is several long, narrowly spaced stitches that form the top of a T between shorter perpendicular stitches.
Stitch back on your left to just past the original bar tack.
Tie off or backstitch your thread.

Starting on the right of the existing buttonhole, stitch to your chalk mark or pin, matching the width of the original stitching.

Stitch a new bar tack.

Stitch back on your left to just past the original bar tack.

Tie off or backstitch your thread.

Step 7

Using the point of your scissors, cut through the original bar tack and between your new side stitching until you have reached the new bar tack.
Do not cut through your new bar tack.

Using the point of your scissors, cut through the original bar tack and between your new side stitching until you have reached the new bar tack.

Do not cut through your new bar tack.

Step 8

If using the existing button, you may have to cut it off and move it slightly to be centered in the larger buttonhole and resew it on.
Very near the place where your button was originally sewn on, center your button in your adjusted buttonhole. Using chalk or a pin, mark this location.
Sew your button on.
Check to make sure it fits through your adjusted buttonhole well.

If using the existing button, you may have to cut it off and move it slightly to be centered in the larger buttonhole and resew it on.

Very near the place where your button was originally sewn on, center your button in your adjusted buttonhole. Using chalk or a pin, mark this location.

Sew your button on.

Check to make sure it fits through your adjusted buttonhole well.

A sewing machine with a buttonhole presser foot is ideal, but this project can be completed with needle and thread.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Ilene Withers

Member since: 01/11/2021

184 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Northern Arizona University, Team S1-G11, Konrad Spring 2021                        

                                                  Member of Northern Arizona University, Team S1-G11, Konrad Spring 2021 



                    NAU-KONRAD-S21S1G11                     


                                            3 Members                     


                                            1 Guide authored

Featured Student Guide#

Introduction#

What you need#

Team#

Featured Student Guide

Introduction

What you need

Team