Difficulty
Easy
Steps
7
Time Required
10 - 15 minutes
Sections
1
- How to Adjust TektroAries MD-M300 Mechanical Disc Brakes
- 7 steps
Flags
0
BackBicycles
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
How to Adjust TektroAries MD-M300 Mechanical Disc Brakes
- You will see a cable attached to an Allen bolt.
You will see a cable attached to an Allen bolt.
1024
Step 2
- Loosen up the bolt with the help of Hex key set.
Loosen up the bolt with the help of Hex key set.
Step 3
- Now, pull the cable as much as you can.
Now, pull the cable as much as you can.
Step 4
- Tighten up the bolt while you keep pulling the cable.
Tighten up the bolt while you keep pulling the cable.
Step 5
- To center the caliper for a smooth breaking experience, loosen up the two bolts of the brake situated at top and at bottom.
To center the caliper for a smooth breaking experience, loosen up the two bolts of the brake situated at top and at bottom.
Step 6
- Now, put the brake on.
Now, put the brake on.
Step 7
- While putting the brake on, tighten up both the bolts.
- You are finished adjusting the brakes!
While putting the brake on, tighten up both the bolts.
You are finished adjusting the brakes!
Cancel: I did not complete this guide.
Author
with 1 other contributor
Md Abdullah
Member since: 07/03/2021
153 Reputation
1 Guide authored
Badges:
3
Team
York University, Team S2-G3, Melo-Thaiss Summer 2021
Member of York University, Team S2-G3, Melo-Thaiss Summer 2021
YORK-MELO-THAISS-SU21S2G3
1 Member
1 Guide authored
