Difficulty

Easy

Steps

7

Time Required

                          5 minutes

Sections

1

  • How to Assemble Sigrow Soil Pro Mini
  • 7 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSigrow Soil Pro Mini

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Necessary parts
  • Make sure you have all the necessary parts to assemble the Soil Pro Mini.
  • Soil sensor
  • Battery
  • PCB
  • Wireless charger

Make sure you have all the necessary parts to assemble the Soil Pro Mini.

Soil sensor

Battery

PCB

Wireless charger

1024

Step 2

              Prepare the wireless charger
  • Carefully fold the wireless charger just above the words “Wireless Charger”.
  • There are two parts inside the wireless charger. The fold is placed inbetween these two parts.

Carefully fold the wireless charger just above the words “Wireless Charger”.

There are two parts inside the wireless charger. The fold is placed inbetween these two parts.

Step 3

              Connect parts to the PCB
  • The soil sensor, battery and wireless charger all need to be connected to the PCB.
  • Battery
  • Make sure to connect the red wire to the plus (+) side as marked on the PCB. In this photo, the positive side is on the left.
  • Wireless charger
  • Soil sensor
  • When connecting the soil sensor and the PCB, you should hear a click.

The soil sensor, battery and wireless charger all need to be connected to the PCB.

Make sure to connect the red wire to the plus (+) side as marked on the PCB. In this photo, the positive side is on the left.

When connecting the soil sensor and the PCB, you should hear a click.

Step 4

              Insert the PCB into the case
  • The PCB and the wireless charger are inserted into the deep pocket of the soil sensor.
  • Make sure that the Wireless Charger logo is facing towards the outside of the case.
  • Assembly is easiest when the PCB is inserted at a slight angle.
  • Push the wireless charged in behind the PCB.
  • The PCB and wireless charger should be at the same height, but not inserted all the way.

The PCB and the wireless charger are inserted into the deep pocket of the soil sensor.

Make sure that the Wireless Charger logo is facing towards the outside of the case.

Assembly is easiest when the PCB is inserted at a slight angle.

Push the wireless charged in behind the PCB.

The PCB and wireless charger should be at the same height, but not inserted all the way.

Step 5

              Insert the battery
  • The battery should be placed in front of the PCB. This is easiest when diagonally inserted.
  • The battery wires are in the upper righthand corner.

The battery should be placed in front of the PCB. This is easiest when diagonally inserted.

The battery wires are in the upper righthand corner.

Step 6

              Complete assembly
  • The components can now be pressed in all the way.
  • The PCB must be below the edge of the soil sensor. The wireless charger is allowed to stick out a little bit.

The components can now be pressed in all the way.

The PCB must be below the edge of the soil sensor. The wireless charger is allowed to stick out a little bit.

Step 7

              Packaging
  • Put the assembled Soil Pro Mini back in the bag.
  • Place 20 assembled Soil Pro Minis back in the box.
  • There shoud be two rows of nine sensors in the box. Two sensors can be placed between the rows.

Put the assembled Soil Pro Mini back in the bag.

Place 20 assembled Soil Pro Minis back in the box.

There shoud be two rows of nine sensors in the box. Two sensors can be placed between the rows.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Sigrow

Member since: 05/14/2020

1,075 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Sigrow                        

                                                  Member of Sigrow 



                    Community                     


                                            3 Members                     


                                            5 Guides authored