Difficulty

Moderate

Steps

8

Time Required

                          1 hour

Sections

1

  • How to build a computer
  • 8 steps

Flags

0

  • BackOrdenador

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Power supply
  • Locate the power supply INSIDE the box.

Locate the power supply INSIDE the box.

1024

Step 2

              Ventilation box
  • Place the fan on the back of the case and screw in the four corners.
  • Observe the orientation of the fan, so that its air flow circulates from the inside to the outside

Place the fan on the back of the case and screw in the four corners.

Observe the orientation of the fan, so that its air flow circulates from the inside to the outside

Step 3

              Processor
  • Place the processor in its socket, respecting the pin orientation.
  • Do not force it, to prevent the pins from bending. It should go in smoothly.

Place the processor in its socket, respecting the pin orientation.

Do not force it, to prevent the pins from bending. It should go in smoothly.

Step 4

              Processor cooling
  • Apply the thermal paste on the processor.

Apply the thermal paste on the processor.

Step 5

              Processor Cooling Fan
  • Fit on top the cooling with the fan, with the thermal paste between the two.
  • Connect the fan to the motherboard.

Fit on top the cooling with the fan, with the thermal paste between the two.

Connect the fan to the motherboard.

Step 6

              RAM Memory
  • Open the socket tabs on the motherboard.
  • Once the module is correctly oriented, press it all the way down.

Open the socket tabs on the motherboard.

Once the module is correctly oriented, press it all the way down.

Step 7

              Hard Disk
  • Place the hard disk on its rails.
  • Slide the hard drive in, until it is aligned with the screw holes. Screw it on both sides.
  • Connect the supplied SATA cable to the hard disk and the motherboard.
  • Connect the power cable coming from the power supply unit.

Place the hard disk on its rails.

Slide the hard drive in, until it is aligned with the screw holes. Screw it on both sides.

Connect the supplied SATA cable to the hard disk and the motherboard.

Connect the power cable coming from the power supply unit.

Step 8

              Optical Unit
  • Place the hard disk on its rails, inserting it from the outside to the inside.
  • Previously remove the external cover of the box at the desired height.
  • Screw the unit on both sides.
  • Connect the supplied SATA cable to the drive and to the motherboard.
  • Connect the power cable coming from the power supply unit.

Place the hard disk on its rails, inserting it from the outside to the inside.

Previously remove the external cover of the box at the desired height.

Screw the unit on both sides.

Connect the supplied SATA cable to the drive and to the motherboard.

To disassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        Penny is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Penny

Author

                                      with 1 other contributor 


                    Francisco Ortiz

Member since: 12/18/2019

187 Reputation

                                      1 Guide authored                  



                       Badges:
                       2