Difficulty

Easy

Steps

8

Time Required

Suggest a time??

Sections

3

  • Honda EU2200IT A2 Safety Precautions
  • 3 steps
  • Maintenance Cover
  • 2 steps
  • How to Change the Oil for the Honda EU2200IT A2
  • 3 steps

Flags

0

  • BackHonda EU2200IT A2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Oil specifications:SAE 10W-300.46 US quarts (0.44 L)

What you need

Step 1

              Honda EU2200IT A2 Safety Precautions
  • Before you begin, make sure the generator is switched off and the generator is cool to the touch.

Before you begin, make sure the generator is switched off and the generator is cool to the touch.

1024

Step 2

              Disconnect the spark plug
  • Lift and remove the spark plug cover.

Lift and remove the spark plug cover.

Step 3

  • Grab the plastic housing at the end of the spark plug wire.
  • Pull firmly to disconnect the wire from the spark plug.

Grab the plastic housing at the end of the spark plug wire.

Pull firmly to disconnect the wire from the spark plug.

Step 4

              Remove the maintenance cover
  • Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.

Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.

Step 5

  • Swing the top of the maintenance cover out.
  • Remove the maintenance cover.

Swing the top of the maintenance cover out.

Remove the maintenance cover.

Step 6

              Drain the engine oil
  • Unscrew and remove the oil filler cap.

Unscrew and remove the oil filler cap.

Step 7

  • Place an oil pan below the fill port to catch the engine oil.
  • Carefully tilt the generator towards the oil pan to drain the oil.

Place an oil pan below the fill port to catch the engine oil.

Carefully tilt the generator towards the oil pan to drain the oil.

Step 8

  • During reassembly, be sure to refill the engine oil:
  • If you recently resealed the crankcase cover with liquid sealant, wait at least 20 minutes before adding oil.
  • Use SAE 10W-30 oil, up to 0.46 US quarts.
  • Add oil until the dipstick is almost completely submerged.

During reassembly, be sure to refill the engine oil:

If you recently resealed the crankcase cover with liquid sealant, wait at least 20 minutes before adding oil.

Use SAE 10W-30 oil, up to 0.46 US quarts.

Add oil until the dipstick is almost completely submerged.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                    Arthur Shi

Member since: 01/03/2018

211,874 Reputation

                                      442 Guides authored                  



                       Badges:
                       46







                                                        +43 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored