How To Check Resistance Of Suzuki Wagon R Temperature Sensor Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

• How to Check Resistance of Suzuki Wagon R Temperature Sensor
• 4 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackSuzuki

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Safety Information               

• Be careful when working on Engine! Dont test when engine is running. Wait for engine to cool down!!

Be careful when working on Engine! Dont test when engine is running. Wait for engine to cool down!!

1024

Step 2

              Open the Bonnet to access Engine Compartment               

• Pull the bonnet release handle located on the outboard side of the driver’s side of the instrument panel. This will disengage the bonnet lock halfway
• Push the under-bonnet release lever sideways with your finger. While pushing the lever, lift up the bonnet
• Continue to lift up the bonnet until it is high enough to support with the prop rod
• Make sure the bonnet is fully closed and latched before driving. If it is not,it can fly up unexpectedly during driving, obstructing your view and resulting in an accident.

Pull the bonnet release handle located on the outboard side of the driver’s side of the instrument panel. This will disengage the bonnet lock halfway

Push the under-bonnet release lever sideways with your finger. While pushing the lever, lift up the bonnet

Continue to lift up the bonnet until it is high enough to support with the prop rod

Make sure the bonnet is fully closed and latched before driving. If it is not,it can fly up unexpectedly during driving, obstructing your view and resulting in an accident.

Step 3

              Unplug the Plug connection               

• The component Intake air temperature sensor is located in the intake pipe just after the Air Filter.
• Unplug the plug connection by pressing the release tab

The component Intake air temperature sensor is located in the intake pipe just after the Air Filter.

Unplug the plug connection by pressing the release tab

Step 4

              Measure Resistance               

• Turn the knob in the multimeter to set the test to Ohms/Resistance
• Connect the terminal 1 and 2 of the component Intake air temperature sensor to Multimeter positive and negative
• The set value at ignition on and engine cold is 1.3KOhms

Turn the knob in the multimeter to set the test to Ohms/Resistance

Connect the terminal 1 and 2 of the component Intake air temperature sensor to Multimeter positive and negative

The set value at ignition on and engine cold is 1.3KOhms

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    ananda                     

Member since: 03/18/2015

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge