Difficulty
Easy
Steps
8
Time Required
5 - 10 minutes
Sections
2
- Front and Back Covers
- 7 steps
- How to clean Canon PowerShot A550 buttons
- 1 step
Flags
0
BackCanon PowerShot A550
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front and Back Covers
- Unscrew a total of 6 4.45 mm phillips head screws using a #00 phillips head screwdriver.
- There are 2 screws on the left side (when looking at the front of the camera).
- There are 3 screws on the bottom
- There is 1 screw on the right side
Unscrew a total of 6 4.45 mm phillips head screws using a #00 phillips head screwdriver.
There are 2 screws on the left side (when looking at the front of the camera).
There are 3 screws on the bottom
There is 1 screw on the right side
1024
Step 2
- Turn to the bottom of the camera.
- Open the memory card cover by sliding the “CARD/BATT.” button up, and then pulling the cover to the left.
Turn to the bottom of the camera.
Open the memory card cover by sliding the “CARD/BATT.” button up, and then pulling the cover to the left.
Step 3
- This is what the SD card/battery compartment looks like when opened.
- Remove one 4.45mm phillips head screw from the SD card/battery compartment using a #00 phillips head screwdriver.
This is what the SD card/battery compartment looks like when opened.
Remove one 4.45mm phillips head screw from the SD card/battery compartment using a #00 phillips head screwdriver.
Step 4
- Gently remove the front cover away from the camera body.
- Tip: Start by loosening the teeth on the left side of the camera next to the battery compartment.
Gently remove the front cover away from the camera body.
Tip: Start by loosening the teeth on the left side of the camera next to the battery compartment.
Step 5
- The camera should look like this once the front cover is removed.
The camera should look like this once the front cover is removed.
Step 6
- Start from the battery compartment and remove the back cover.
- Caution: Do not tug on the back cover after it is removed. This could tear the ribbon attaching the back cover to the camera body.
- Remove the connecting ribbon from the body of the camera using a pair of tweezers.
Start from the battery compartment and remove the back cover.
Caution: Do not tug on the back cover after it is removed. This could tear the ribbon attaching the back cover to the camera body.
Remove the connecting ribbon from the body of the camera using a pair of tweezers.
Step 7
- Once the ribbon connecting the back cover is removed, the back of the camera body should look like this.
Once the ribbon connecting the back cover is removed, the back of the camera body should look like this.
Step 8
How to clean Canon PowerShot A550 buttons
- Turn to the back of the camera body. Rub the function keys and surrounding area with a clean cloth dipped in isopropyl alcohol.
Turn to the back of the camera body. Rub the function keys and surrounding area with a clean cloth dipped in isopropyl alcohol.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Shaelyn Thomas
Member since: 04/19/2011
323 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 8-6, Regan Spring 2011
Member of Cal Poly, Team 8-6, Regan Spring 2011
CPSU-REGAN-S11S8G6
4 Members
22 Guides authored
Rupesh Jamsandekar - Dec 22, 2012
Reply
new Battery in side & massages is Battery low why?