Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- How to clear a Epson Stylus Photo 820 paper jam
- 4 steps
Flags
0
BackEpson Stylus Photo 820
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
How to clear a Epson Stylus Photo 820 paper jam
- If a paper jam is detected, the middle button will display a red light.
- Press the red button. This will cause the printer to try to automatically correct the issue.
- If this works, proceed to step 4. Otherwise, proceed to step 2.
If a paper jam is detected, the middle button will display a red light.
Press the red button. This will cause the printer to try to automatically correct the issue.
If this works, proceed to step 4. Otherwise, proceed to step 2.
1024
Step 2
- The first step in repair is to attempt to remove the paper jam by pulling it out through the top.
- Pull the paper slowly, and as straight as possible.
- If this does not work, proceed to step 3.
The first step in repair is to attempt to remove the paper jam by pulling it out through the top.
Pull the paper slowly, and as straight as possible.
If this does not work, proceed to step 3.
Step 3
- Assuming the paper will not come out of the top, assess the paper jam.
- If the print cartridge is in the way, gently push it to the side.
- Try to get the full edge of the paper above the metal grating.
- Gently pull the paper out the of the open hatch.
Assuming the paper will not come out of the top, assess the paper jam.
If the print cartridge is in the way, gently push it to the side.
Try to get the full edge of the paper above the metal grating.
Gently pull the paper out the of the open hatch.
Step 4
- If the paper jam was corrected during step 1, the red light should have turned off, leaving only a green light.
- If steps 2 or 3 corrected the problem, you will need to press the red button again.
- This may cause another sheet of paper to be pulled through. Do not be alarmed.
- This should cause the red light to go out.
If the paper jam was corrected during step 1, the red light should have turned off, leaving only a green light.
If steps 2 or 3 corrected the problem, you will need to press the red button again.
This may cause another sheet of paper to be pulled through. Do not be alarmed.
This should cause the red light to go out.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
dante gagliardi
Member since: 04/13/2011
45 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
Cal Poly, Team 20-68, Walters Spring 2011
Member of Cal Poly, Team 20-68, Walters Spring 2011
CPSU-WALTERS-S11S20G68
4 Members
6 Guides authored