Difficulty

Moderate

Steps

7

Time Required

                          15 minutes

Sections

1

  • How to Fix a Paper Jam From the Rear in a Canon Pixma TR4520
  • 7 steps

Flags

0

  • BackCanon Printer

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              How to Fix a Paper Jam From the Rear in a Canon Pixma TR4520
  • Press Stop to cancel the print job.

Press Stop to cancel the print job.

1024

Step 2

  • Turn off the printer.
  • Unplug your printer from the power source.

Turn off the printer.

Unplug your printer from the power source.

Step 3

  • Open the front tray and check for jammed paper.
  • If you don’t see any jammed paper, skip to step 5.

Open the front tray and check for jammed paper.

If you don’t see any jammed paper, skip to step 5.

Step 4

  • Pull the paper out slowly using both of your hands to avoid tearing.
  • If paper tears apart, do not force the paper out. You can remove any remaining paper by accessing the back panel.
  • If you were able to remove all of the jammed paper through the front, there’s no need to continue! Simply proceed using your printer as normal.

Pull the paper out slowly using both of your hands to avoid tearing.

If paper tears apart, do not force the paper out. You can remove any remaining paper by accessing the back panel.

If you were able to remove all of the jammed paper through the front, there’s no need to continue! Simply proceed using your printer as normal.

Step 5

  • Lay the printer on its backside to expose the bottom panel.
  • Remove the two screws holding the transport unit cover in place with a Phillips #1 screwdriver.

Lay the printer on its backside to expose the bottom panel.

Remove the two screws holding the transport unit cover in place with a Phillips #1 screwdriver.

Step 6

  • Lift off the transport unit cover.
  • Be gentle while removing the cover. You don’t want to damage it.

Lift off the transport unit cover.

Be gentle while removing the cover. You don’t want to damage it.

Step 7

  • Remove any remaining paper gently either using your fingers or a pair of tweezers.

Remove any remaining paper gently either using your fingers or a pair of tweezers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Ani Gurtsishvili

Member since: 10/20/2020

211 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       York University, Team S1-G98, Woodhouse Fall 2020                        

                                                  Member of York University, Team S1-G98, Woodhouse Fall 2020 



                    YORK-WOODHOUSE-F20S1G98                     


                                            1 Member                     


                                            1 Guide authored

Lex - Jun 2, 2021

Reply

can you show the whole bottom without the tray being in the way? I would really appreciate!

kresge - Aug 30, 2021

Reply

it still has the two lights blinking

directions did not help, the yellow and ogange till blinks

it did not work

Leah Campbell - Sep 11, 2021

Reply

Papers stuck it won’t budge I’m underneath and it’s gripped it like a vice! Didn’t work where do we go from here this is horrible!