Difficulty

Easy

Steps

9

Time Required

                          7 - 15 minutes

Sections

1

  • How to Fix a Skewed Wheel on a Children’s Kick Scooter
  • 9 steps

Flags

0

  • BackToy

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              How to Fix a Skewed Wheel on a Children's Kick Scooter
  • Remove the two bottom 16 mm pan head screws using a Phillips #1 screwdriver.

Remove the two bottom 16 mm pan head screws using a Phillips #1 screwdriver.

1024

Step 2

  • Remove the two 12 mm button head screws on top using a 4 mm Allen wrench.

Remove the two 12 mm button head screws on top using a 4 mm Allen wrench.

Step 3

  • Remove the plastic case from the base of the scooter.

Remove the plastic case from the base of the scooter.

Step 4

  • Carefully pull the sides of the wheels up and remove them from the spring.

Carefully pull the sides of the wheels up and remove them from the spring.

Step 5

  • Grab the spring with combination pliers and bend it into a straight position.
  • Don’t bend the spring too much as it could snap and replacement would be needed.

Grab the spring with combination pliers and bend it into a straight position.

Don’t bend the spring too much as it could snap and replacement would be needed.

Step 6

  • Insert the spring into the center section of the wheels.
  • Slide the two rings on the sides of the wheels into the two rods.

Insert the spring into the center section of the wheels.

Slide the two rings on the sides of the wheels into the two rods.

Step 7

  • Insert the plastic case back into its original position.

Insert the plastic case back into its original position.

Step 8

  • Insert and tighten the two 12 mm button head screws on top using a 4 mm Allen wrench.

Insert and tighten the two 12 mm button head screws on top using a 4 mm Allen wrench.

Step 9

  • Replace the two bottom 16 mm pan head screws using a Phillips #1 screwdriver.

Replace the two bottom 16 mm pan head screws using a Phillips #1 screwdriver.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Amir Issagali

Member since: 01/10/2021

169 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S1-G14, O'Regan Winter 2021                        

                                                  Member of York University, Team S1-G14, O'Regan Winter 2021 



                    YORK-O'REGAN-W21S1G14                     


                                            1 Member                     


                                            1 Guide authored