Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
1
- How to Fix Jammed Nintendo Switch ZR and ZL buttons
- 6 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackNintendo Switch Joy-Con
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
How to Fix Jammed Nintendo Switch ZR and ZL buttons
- Using the Y00 Tri-Point screwdriver, remove four M1.4 x 5mm screws to loosen the hard plastic back of the remote.
Using the Y00 Tri-Point screwdriver, remove four M1.4 x 5mm screws to loosen the hard plastic back of the remote.
1024
Step 2
- After the screws are removed, lift the hard-plastic cover to reveal the inside of the remote and locate the ZL button.
- The button exposed could either be the ZL or the ZR depending on which remote needs to be fixed.
After the screws are removed, lift the hard-plastic cover to reveal the inside of the remote and locate the ZL button.
The button exposed could either be the ZL or the ZR depending on which remote needs to be fixed.
Step 3
- Once the hard-plastic cover is removed, locate the ZL button inside the remote.
- The button exposed after removing the hard-plastic cover of the remote may either be the ZR or ZL button, depending on which remote needs to be fixed (right or left).
Once the hard-plastic cover is removed, locate the ZL button inside the remote.
The button exposed after removing the hard-plastic cover of the remote may either be the ZR or ZL button, depending on which remote needs to be fixed (right or left).
Step 4
- Use the tweezers to lift the ZL button a little then pull upwards to get it back into place.
- Once the button is back in place, place the hard cover back on the remote and re-screw it.
Use the tweezers to lift the ZL button a little then pull upwards to get it back into place.
Once the button is back in place, place the hard cover back on the remote and re-screw it.
Step 5
- Click the ZL buttons a couple times to ensure that it’s back in place and working.
- This may either be the ZL or ZR button depending on the remote being fixed.
Click the ZL buttons a couple times to ensure that it’s back in place and working.
This may either be the ZL or ZR button depending on the remote being fixed.
Step 6
- Resume gameplay!
Resume gameplay!
After following those 7 steps, your gameplay should be able to return to it’s original state. If the other remote also has a jammed ZL or ZR button simply repeat the 7 steps:
- Flip your Nintendo Switch remote over and locate the 4 screws.Use your Y00 tri-point screwdriver to unscrew the back.Lift the hard plastic cover to expose the inside of the remote.Locate the ZL (or ZR) button.Use the tweezers to carefully lift and then push the ZL (or ZR) button up to put it back into place.
- Put the hard plastic cover back on the remote and re-screw it shut.
- Click the ZL (or ZR)button a couple of times to ensure that you’ve moved it back into place properly, then resume gameplay.
Cancel: I did not complete this guide.
11 other people completed this guide.
Author
with 5 other contributors
Gabriela Cruz-Pagan
Member since: 02/02/2020
403 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2020
Member of USF Sarasota-Manatee, Team S1-G1, Stewart Spring 2020
USFSM-STEWART-S20S1G1
23 Members
24 Guides authored