Difficulty

Moderate

Steps

6

Time Required

                          20 - 30 minutes

Sections

1

  • How to Get Finer Coffee Grounds for Espresso on the Beguko Coffee Grinder
  • 6 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackBeguko Coffee Grinder BD-CG0156

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 1

              How to Get Finer Coffee Grounds for Espresso on the Beguko Coffee Grinder
  • After removing the hopper, you’ll see some beans, make sure you clean it before the next step.

After removing the hopper, you’ll see some beans, make sure you clean it before the next step.

1024

Step 2

  • First remove this paper. It is glued on the plastic. I used a knife and a flat screw driver. Keep it to put it back later.

First remove this paper. It is glued on the plastic. I used a knife and a flat screw driver. Keep it to put it back later.

Step 3

  • Underneath you’ll find 4 screws. Those are triangle screws, and require a triangle screwdriver as pictured. You might be able to use a small phillips screwdriver.

Underneath you’ll find 4 screws. Those are triangle screws, and require a triangle screwdriver as pictured. You might be able to use a small phillips screwdriver.

Step 4

  • Remove the top part. Carefully disconnect the cable.

Remove the top part. Carefully disconnect the cable.

Step 5

  • You will find two screws on the left and right sides. Unscrew them. You won’t be able to fully remove them, that’s normal.
  • Now turn the piece of plastic that holds these two screws clockwise, just a bit. You can now screw back the two screws, one or two holes from their original place.

You will find two screws on the left and right sides. Unscrew them. You won’t be able to fully remove them, that’s normal.

Now turn the piece of plastic that holds these two screws clockwise, just a bit. You can now screw back the two screws, one or two holes from their original place.

Step 6

  • You can now put it back in reverse order. Note that the arrow might not be anymore at the same place as before. This is great, you can grind finer.
  • Make sure you only grind one step finer first. Not more. The risk is that the two burrs will be too close and will be damaged. So try first on the original setting, and only grind finer one step at a time. If you hear a screeching sound stop! And go back one step.

You can now put it back in reverse order. Note that the arrow might not be anymore at the same place as before. This is great, you can grind finer.

Make sure you only grind one step finer first. Not more. The risk is that the two burrs will be too close and will be damaged. So try first on the original setting, and only grind finer one step at a time. If you hear a screeching sound stop! And go back one step.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Alki

Member since: 09/17/2022

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       2