Difficulty
Difficult
Steps
3
Time Required
1 hour
Sections
1
- How to repair bObsweep wheel encoder
- 3 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackbObsweep Robotic Vacuum Cleaner
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Disassembly and check
- Open the vacuum following another guide like: bObsweep Robotic Vacuum Cleaner Left or Right Wheel Replacement
- Using your phone camera, see if the infrared LED is emitting light. The vacuum keep the LEDs in the wheel powered at all times while is powered on
Open the vacuum following another guide like: bObsweep Robotic Vacuum Cleaner Left or Right Wheel Replacement
Using your phone camera, see if the infrared LED is emitting light. The vacuum keep the LEDs in the wheel powered at all times while is powered on
1024
Step 2
Remove the old led
- Open the wheel assembly
- Desolder the led. The led is in the side with only one connection (red in the image)
Open the wheel assembly
Desolder the led. The led is in the side with only one connection (red in the image)
Step 3
Replace
- I am going to use a small led from a cheap remote
- The positive led go to the side of the red wire
I am going to use a small led from a cheap remote
The positive led go to the side of the red wire
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Erwin
Member since: 07/01/2014
217 Reputation
2 Guides authored
Badges:
5
+2 more badges