How To Repair The Eurolite N 19 Fog Machine Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          10 minutes            

Sections

1

• How to repair the Eurolite N-19 Fog Machine
• 4 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackEurolite N-19

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The fog machine I repaired is called ’eurolite n-19’, but it is also sold under other names.

What you need

Step 1

              Opening the fog machine               

• Open the fog machine by removing the screws on the sides of the fog machine with the appropriate screwdriver.
• Remove the outer casing of the fog machine.

Open the fog machine by removing the screws on the sides of the fog machine with the appropriate screwdriver.

Remove the outer casing of the fog machine.

1024

Step 2

              Evaluating the problem               

• If the fog machine does not heat up, a fuse or another heating element could be malfunctioning.
• If no smoke is coming out of the fog machine, then the pump could be malfunctioning

If the fog machine does not heat up, a fuse or another heating element could be malfunctioning.

If no smoke is coming out of the fog machine, then the pump could be malfunctioning

Step 3

              Repairing the fog machine               

• In this instance, all that was needed was a new heat fuse and new spade connectors
• In this case, I needed to remove the heat fuse and the spade connectors then needed to connect the new heat fuse and spade connectors to their respective locations
• The heat fuse sits under the bimetal. (Cannot be seen clearly in the picture)

In this instance, all that was needed was a new heat fuse and new spade connectors

In this case, I needed to remove the heat fuse and the spade connectors then needed to connect the new heat fuse and spade connectors to their respective locations

The heat fuse sits under the bimetal. (Cannot be seen clearly in the picture)

Step 4

              Reassembling the fog machine               

• To reassemble your machine, follow the steps for diassembly in reverse order.

To reassemble your machine, follow the steps for diassembly in reverse order.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    rjay                     

Member since: 09/29/2012

233 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

vishal_kishor777 - Feb 6, 2017

Reply

My fogger heater is jam how can I clean it?

Ember Leona - Jan 15, 2018

Reply

hmm… I think I could have written a better guide myself. Okay so I have a 3 pin XLR for phase does anyone know how this works also I noted that the fuse was melted into its holster and the pump seems dead. My Fogger also has some kind of potentiometer which controls the heating element which is like a ceramic sandwich and two spark plugs… I also was wondering if glycerin fog juice can be made with vegetable glycerin or the glycol type or if this is what cloggs the machine. Also will clr work or be dangerous fume wise? Can you market glycerine as fog juice thickener like STP fuel additives for cars?? g0pg.xyz is my website you can learn how to force push graphite if you look for the post with yoda!

Giedrius Stasiulis - May 20, 2018

Reply

Where can I buy a fuse like this? Have looked over the net, but could not find any shops that would sell CH-15 fuse, used in this fog machine. If anyone knows about this, please share info. Thanks! By the way, I’m based in EU.

Mad_as_a_hatter - Sep 4, 2020

I would make a post on Halloweenform.com

Ohwaga Kerry - Aug 20, 2018

Reply

My fog machine is not pumping out smoke