How To Repair The Sparker On A Merlion Mini Torch Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

How to Repair the Sparker on a Merlion Mini Torch
9 steps

Flags

BackLighter
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              How to Repair the Sparker on a Merlion Mini Torch

Use the screwdriver to remove all the 1.2 mm Phillips #1 countersunk screws from the torch.

Use the screwdriver to remove all the 1.2 mm Phillips #1 countersunk screws from the torch.

1024

Step 2

Open up the torch.
Set aside the empty side of the torch.

Open up the torch.

Set aside the empty side of the torch.

Step 3

Pull the handle down as if you were to use the torch.
You will see one of the parts inside spark. This is the sparker.
Now gently remove the handle and set it aside.

Pull the handle down as if you were to use the torch.

You will see one of the parts inside spark. This is the sparker.

Now gently remove the handle and set it aside.

Step 4

Grab your pliers and GENTLY tug the sparker towards the Merlion head until it is extended about a centimeter.

Grab your pliers and GENTLY tug the sparker towards the Merlion head until it is extended about a centimeter.

Step 5

Gently bend the sparker until it is positioned near the opening of the Merlion’s mouth.

Gently bend the sparker until it is positioned near the opening of the Merlion’s mouth.

Step 6

Grab the tube and gently bend it so it faces the opening of the Merlion’s mouth.
Put the handle back on the torch.

Grab the tube and gently bend it so it faces the opening of the Merlion’s mouth.

Put the handle back on the torch.

Step 7

Take the empty half of the torch and place it over the other half.

Take the empty half of the torch and place it over the other half.

Step 8

Use the screwdriver to put the screws back in the torch.

Use the screwdriver to put the screws back in the torch.

Step 9

Hold the torch upside down and position the butane above the torch’s hole.
Gently press down for five seconds.

Hold the torch upside down and position the butane above the torch’s hole.

Gently press down for five seconds.

Congrats! Now you can use your Merlion torch again.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Neel Kogali

Member since: 09/29/2015

173 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 14-3, Green Fall 2015                        

                                                  Member of Cal Poly, Team 14-3, Green Fall 2015 



                    CPSU-GREEN-F15S14G3                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team