Difficulty
Easy
Steps
10
Time Required
5 minutes
Sections
1
- Battery
- 10 steps
Flags
0
BackKeyless Entry Remote
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Locate the space to put the screwdriver.
- Put the screwdriver in this space and pry open the remote.
- You do not need to use much force to open it.
Locate the space to put the screwdriver.
Put the screwdriver in this space and pry open the remote.
You do not need to use much force to open it.
1024
Step 2
- Take the half with the buttons and use your fingernails to take out the button pad.
Take the half with the buttons and use your fingernails to take out the button pad.
Step 3
- Clean out dirt from remote cover and button pad.
- This helps the remote stick once you put it back together.
Clean out dirt from remote cover and button pad.
This helps the remote stick once you put it back together.
Step 4
- Put the screwdriver in between the battery and the remote cover.
- Push the screwdriver down which will make the battery pop out of the remote cover.
Put the screwdriver in between the battery and the remote cover.
Push the screwdriver down which will make the battery pop out of the remote cover.
Step 5
- Get your new battery and locate the positive side.
- Put the positive side facing down towards the cover.
- Click it into its position.
- Take the other half of the remote and put the case back together.
Get your new battery and locate the positive side.
Put the positive side facing down towards the cover.
Click it into its position.
Take the other half of the remote and put the case back together.
Step 6
- Get in your vehicle and make sure all doors are closed.
- Put the key in the ignition.
Get in your vehicle and make sure all doors are closed.
Put the key in the ignition.
Step 7
- These are the positions the key has to be in to be on and off.
- This position is on.
- This position is off.
These are the positions the key has to be in to be on and off.
This position is on.
This position is off.
Step 8
- Turn the car on.
- Turn the car off.
- Repeat this eight times.
- Do not turn on the engine.
- Stop on the eighth time with the key turning the car on.
Turn the car on.
Turn the car off.
Repeat this eight times.
Do not turn on the engine.
Stop on the eighth time with the key turning the car on.
Step 9
- The car (not the engine) should be on for this whole step.
- You will then hear the car lock then unlock, telling you that it is time to pair the remote with the vehicle.
- Then press any button on the remote to pair with the car.
- The car should then lock and unlock again to verify that your vehicle and your remote have paired.
The car (not the engine) should be on for this whole step.
You will then hear the car lock then unlock, telling you that it is time to pair the remote with the vehicle.
Then press any button on the remote to pair with the car.
The car should then lock and unlock again to verify that your vehicle and your remote have paired.
Step 10
- Turn off the car and take it out of the ignition.
- Click all four buttons to check and see if the remote is paired.
Turn off the car and take it out of the ignition.
Click all four buttons to check and see if the remote is paired.
Once you can lock, unlock, open the trunk, and set off the car alarm. Your keyless entry remote has been paired.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Ryan Mattel
Member since: 09/29/2015
141 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Cal Poly, Team 14-5, Green Fall 2015
Member of Cal Poly, Team 14-5, Green Fall 2015
CPSU-GREEN-F15S14G5
4 Members
5 Guides authored
