Difficulty
Very easy
Steps
5
Time Required
5 minutes
Sections
1
- Toner Cartridge
- 5 steps
Flags
0
BackSamsung SCX-3400
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Toner Cartridge
- Unplug the power cable.
- Unplug the USB printer cable.
Unplug the power cable.
Unplug the USB printer cable.
1024
Step 2
- Open the top printer cover by lifting from the gap.
Open the top printer cover by lifting from the gap.
Step 3
- Lift and hold the smaller grey flap cover with one hand.
- From the bottom left corner of the cover, lift open the inner cover with the other hand.
- The plastic cover is fairly fragile. Do not exert too much pressure.
Lift and hold the smaller grey flap cover with one hand.
From the bottom left corner of the cover, lift open the inner cover with the other hand.
The plastic cover is fairly fragile. Do not exert too much pressure.
Step 4
- Pull the toner cartridge towards you using the toner handle and remove it from the device.
Pull the toner cartridge towards you using the toner handle and remove it from the device.
Step 5
- Once the existing toner cartridge has been taken out, place the replacement toner in by aligning the edges in between the tracks on the printer.
- Slide it downwards to secure it in place.
Once the existing toner cartridge has been taken out, place the replacement toner in by aligning the edges in between the tracks on the printer.
Slide it downwards to secure it in place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Jyotirajsinh Vaghela
Member since: 01/10/2021
122 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
York University, Team S1-G28, O'Regan Winter 2021
Member of York University, Team S1-G28, O'Regan Winter 2021
YORK-O'REGAN-W21S1G28
1 Member
1 Guide authored