Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- How to Restore Contact Point Electrodes
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackbObi Robotic Vacuum
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
How to Restore Contact Point Electrodes
- Remove bObi’s dustbin:
- Push down on the button found on bObi’s back to release the dustbin.
Remove bObi’s dustbin:
Push down on the button found on bObi’s back to release the dustbin.
1024
Step 2
- Inside bObi are two contact point electrodes, secured with a small red fastener and two screws.
- Use a screwdriver to reach underneath the electrodes and pull upward gently to bend them back to the correct shape.
Inside bObi are two contact point electrodes, secured with a small red fastener and two screws.
Use a screwdriver to reach underneath the electrodes and pull upward gently to bend them back to the correct shape.
Step 3
- When the electrodes are fixed, slide the dustbin back into bObi. The HEPA filter side of the dustbin should face down.
- Ensure it locks in place, and the contact point electrodes will line up correctly, so bObi can resume functioning.
When the electrodes are fixed, slide the dustbin back into bObi. The HEPA filter side of the dustbin should face down.
Ensure it locks in place, and the contact point electrodes will line up correctly, so bObi can resume functioning.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Chelsea
Member since: 09/24/2014
2,278 Reputation
31 Guides authored
Badges:
11
+8 more badges